killer 71 c-10
09-02-2007, 09:16 PM
#82
TECH Regular
Thread Starter
iTrader: (1)
Join Date: Oct 2005
Location: tulsa OK
Posts: 439
Likes: 0
Received 0 Likes
on
0 Posts
of coarse, it just wouldnt be the same without ya... i think you need to see the maiden run..... the only thing we're on hold now is the gas fill, steering column thing, and a radio..:p
09-03-2007, 12:22 PM
#85
On The Tree
Join Date: Nov 2006
Location: Hong Kong
Posts: 186
Likes: 0
Received 0 Likes
on
0 Posts
Dude I love that built that thing in your driveway. Very impressive. You live in a similar neighbourhood to mine but my HOA would have sent my *** to jail already if I did what you did. LOL!
09-07-2007, 08:00 PM
#88
TECH Regular
Thread Starter
iTrader: (1)
Join Date: Oct 2005
Location: tulsa OK
Posts: 439
Likes: 0
Received 0 Likes
on
0 Posts
just got back from about a 700mi round trip to get the trucks puter edited...the pics are of killer being loaded ,the new exhaust, P/S lines fabed up,and arriving safely in OKC at Glen (crazy last name) ------------ski
house... these pics are just things being edited in the pcm, like disable VATS, EVAP, rear o2's, speed limiter, shift points, shift firmness, idle speed, etc .........
i thought i would try my hand at dirrecting and make a vid..... and this is really the first attempt....as seen it just cranked a few time and ran.... i still have some tweeking to do before any dyno run, and finish the fuel fill, but all in all the truck is mobile...
house... these pics are just things being edited in the pcm, like disable VATS, EVAP, rear o2's, speed limiter, shift points, shift firmness, idle speed, etc .........i thought i would try my hand at dirrecting and make a vid..... and this is really the first attempt....as seen it just cranked a few time and ran.... i still have some tweeking to do before any dyno run, and finish the fuel fill, but all in all the truck is mobile...
Last edited by 68shortstep; 06-01-2008 at 06:07 PM.
09-17-2007, 09:52 PM
#90
TECH Regular
Thread Starter
iTrader: (1)
Join Date: Oct 2005
Location: tulsa OK
Posts: 439
Likes: 0
Received 0 Likes
on
0 Posts
ok im settling in tulsa ok... and need to update everyone on killer......
im getting the gas tank fill figured out... the heart of it is a 88-98 chevy truck gas door hindge..... its been modded quite a bit....i also made the a/c lines and got the fittings all crimped up and installed.... the a/c is gonna get charged up tonight (on a vacuum now)... but the heater blowes about 145* air....
im getting the gas tank fill figured out... the heart of it is a 88-98 chevy truck gas door hindge..... its been modded quite a bit....i also made the a/c lines and got the fittings all crimped up and installed.... the a/c is gonna get charged up tonight (on a vacuum now)... but the heater blowes about 145* air....
Last edited by 68shortstep; 06-01-2008 at 06:08 PM.
09-23-2007, 05:47 PM
#94
TECH Regular
Thread Starter
iTrader: (1)
Join Date: Oct 2005
Location: tulsa OK
Posts: 439
Likes: 0
Received 0 Likes
on
0 Posts
today i calibrated the speedometer so it doesnt read 120 while actually going about 10MPH....and mounted the rear bumper...modded the rear lience plate bracket and put the receptical for the trailer lights above it.... came out nice.. here are a few engine run vids and exhaust revvs...
Last edited by 68shortstep; 06-01-2008 at 06:09 PM.
