Poly Motor Mounts with LS1 swap?
Thread Starter
On The Tree
Joined: Jan 2006
Posts: 161
Likes: 0
From: Leander, TX
Poly Motor Mounts with LS1 swap? About to drop the LS1 into my LT1 shell. Have the LS1 K member but am unsure on what to do with the motor mounts? Just go with stock ones or upgrade to the polyurethane? If poly, what brand? I see the spohn ones around, are they good. Thanks alot.
Chris
Chris
Thread Starter
On The Tree
Joined: Jan 2006
Posts: 161
Likes: 0
From: Leander, TX
If none of the sponser has them or at a good price..
You should be able to get them from any parts store that has a High Performance part distributor. If not... there is always Jegs or SummitRacing
You should be able to get them from any parts store that has a High Performance part distributor. If not... there is always Jegs or SummitRacing
The stock mounts are junk. You will understand once they are off of the engine. I just finished the swap with the engine/headers in the car....in the name of all that is good and holy please do it NOW to avoid doing it in the car.
Also, you will need a couple of BIG pry bars to get them lined up.
Also, you will need a couple of BIG pry bars to get them lined up.
Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Gas Monkey Built a 6-Wheel Ferrari Testarossa With a Corvette LT4 Engine
Verdad Gallardo
7 Most Reliable High-Performance Engines GM Has Ever Built
Verdad Gallardo
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin
Verdad Gallardo
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo Thread Starter
On The Tree
Joined: Jan 2006
Posts: 161
Likes: 0
From: Leander, TX
haha thanks guys, this is all being done at a shop so they can have all the fun and cussing they want with it. Looks like its better to go with the mounts now. As always, appreciate the help.
