Accessory drive (yet again...)
I have searched, searched, and searched again. I am looking for an accessory drive for my iron 408 LSX motor. It is swapped into a 63 nova and I want to run something very clean. Right now my alternator is mounted on the drivers side down low and I want to keep it that way. What I am looking to do is this:
1) I only want to run an alternator, no other accessories.
2) Run an electric water pump.
Is it possible to have a belt go directly from the crank to the alternator? Would I need to fab my own brackets?
What other solutions do I have? I found the car shop kit but it looks plain jane for the $500 they want. Does anyone have any suppestions?
Thanks!
Jamin
If you run a belt tensioner it should be on the slack side (which would be about where the waterpump is) so that makes it a bit more complicated.
'JustDreamin'
http://www.superchevy.com/technical/...de/index1.html
I think this link is the same place though.
http://www.newmancarcreations.com/en...ans/index.html
David
I appreciate everyones ideas, I will look into them tonight. I have no problem fabing an adjustable bracket.... I might go that route when the motor gets back from the shop. I dont mind buying a kit but I dont really need any accessories, and with the elect. water pump it would look CLEAN with the belt around the crank and alt. only.
Keep the ideas coming and I will let you know what progress I make. Thanks!!!
Jamin
http://moroso.com/catalog/categorydi...?CatCode=30001
http://www.thunderracing.com/catalog...&vid=3&pcid=14
Trending Topics
http://www.thunderracing.com/catalog...&vid=3&pcid=14
The Best V8 Stories One Small Block at Time
-Jamin


