67/6.0 chevelle
TECH Enthusiast
Joined: Apr 2006
Posts: 630
Likes: 1
From: New York City
I had an arm with 2 holes in it , not from a kit. I thought of drilling a new hole but all the locations click in perfect except 1 st which is missing by a hair, I think if i file a little off the shifter for a little more room it will be o k . I dont think there is anything specific for a 4l80, everyone just advertises for a 4 speed auto and it probably all comes from the same place. JOHN
I had an arm with 2 holes in it , not from a kit. I thought of drilling a new hole but all the locations click in perfect except 1 st which is missing by a hair, I think if i file a little off the shifter for a little more room it will be o k . I dont think there is anything specific for a 4l80, everyone just advertises for a 4 speed auto and it probably all comes from the same place. JOHN
TECH Enthusiast
Joined: Apr 2006
Posts: 630
Likes: 1
From: New York City
I didnt buy a kit I bought a complete shifter , I think I will file the detent. that bracket looks like the shifter arm , different than mine- that looks adjustable , mine has 2 different holes.. JOHN
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Gas Monkey Built a 6-Wheel Ferrari Testarossa With a Corvette LT4 Engine
Verdad Gallardo
7 Most Reliable High-Performance Engines GM Has Ever Built
Verdad Gallardo
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin
Verdad Gallardo
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Thread Starter
Launching!
Joined: Jan 2008
Posts: 232
Likes: 0
I got pcm mounted this weekend it took some time but i put it beside battery up inside the finder. Ill post some pics latter when i get time but it worked out pretty good know all the gobb of wires will be hid behind finder.
Boy I am considering doing away with my original A/C under hood evaporator box and your setup looks sweet. I really dig the bulkhead connector it really cleans things up. I worry about how well a aftermarket setup will work though. I was going to adapt my factory setup with a POA eliminator kit. What setup are you using and would you buy it again if you had it to do over?
Thread Starter
Launching!
Joined: Jan 2008
Posts: 232
Likes: 0
you use fatory controls you just have to put a switch in and replace cables that also come with it. nothing to it if you can use a screew driver and read instuctions you can do it. just make sure to set travel on cables before you put it in the car it will make your life easier.
Thread Starter
Launching!
Joined: Jan 2008
Posts: 232
Likes: 0
Getting closer to starting up. got the rest of my parts on the way. and wiring harness in today its not done but getting there. maybe i can start it up in a few more weeks. man im getting antsey been watting 2 years for this day.
