Thinking of an LS1 swap, need some advice.
Thread Starter
TECH Fanatic
Joined: Dec 2005
Posts: 1,414
Likes: 28
Thinking of an LS1 swap, need some advice. I'm thinking of doing a 05 Dodge Magnum (V6) or an 05 Mustang (V6), if I can find one for a decent price. But my question, is what can I do about the factory wiring, head lights, dash lights, ect.. and is possible to use the factory gauges?
Thanks.
Thanks.
Anythings possible. But it would seem a tonne easier to swap in a newer hemi motor?
We have a '06 Magnum R/T. Its a damn nice ride, doesnt handle worth **** in the snow (ive ditched it twice
) But judging by all the little bell's and whistles it would be one hell of a wireing job.
We have a '06 Magnum R/T. Its a damn nice ride, doesnt handle worth **** in the snow (ive ditched it twice
) But judging by all the little bell's and whistles it would be one hell of a wireing job. 
TECH Resident
Joined: Oct 2004
Posts: 800
Likes: 1
From: Simi VAlley,CA
In my opinion this is one small part of doing a swap or conversion. I get asked about wiring, existing gauges etc...all the time. In actualtity, depending on the donor and the subject of the conversion, you have to make alot of compromises, quite a few modifications and be ready to tackle each phase separately. Getting familiar with all the components involved is the easiest way, get some service info on the Dodge or whatever. You'll never be able to just wade in there and "rewire" it, especially if you haven't done this type of thing before. I've done so many of these things over the past 30 years that it doesn't scare me anymore........but it takes quite some time to get fearless!
