S10 Ls1
Thread Starter
Staging Lane
Joined: Oct 2007
Posts: 62
Likes: 0
From: Monterey Co., CA
S10 Ls1 I'm looking to buy some headers for my rig. I was thinking of going with the JBA GTO LS1 shorty headers to keep it smog legal. The tubes are supposed to be 1 5/8". Anybody have any experience fitting similar headers in an S10? Worse comes to worse I can have a guy in town cut, re-weld flanges, etc to make them fit.
__________________
__________________
Trending Topics
Registered User
Joined: Dec 2007
Posts: 15
Likes: 0
From: central new york
Going to be hard to get a off the shelf set of headers that fit correctly.... many guys dont have the engines mounted in the exact same place / angle...
New Age Hotrods made mine custom
LS1 flanges are available from any dealer, part number in the GM performance Cat. tube are 1 5/8, collectors are 2.5 inches.
driver side:
pass side:
as you can see the driver side had to go around the steering shaft:
New Age Hotrods made mine custom
LS1 flanges are available from any dealer, part number in the GM performance Cat. tube are 1 5/8, collectors are 2.5 inches.
driver side:
pass side:
as you can see the driver side had to go around the steering shaft:
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo
TECH Resident
Joined: Jun 2004
Posts: 841
Likes: 2
From: Tampa, FL
Not that I know of, but Current Performance is finishing up their 1-3/4" Long tubes.
http://www.s10forum.com/forum/f213/d...19/index3.html
http://www.s10forum.com/forum/f213/d...19/index3.html
Registered User
Joined: Nov 2012
Posts: 3
Likes: 0
From: maryland
Going to be hard to get a off the shelf set of headers that fit correctly.... many guys dont have the engines mounted in the exact same place / angle...
New Age Hotrods made mine custom
LS1 flanges are available from any dealer, part number in the GM performance Cat. tube are 1 5/8, collectors are 2.5 inches.
driver side:
pass side:
as you can see the driver side had to go around the steering shaft:
New Age Hotrods made mine custom
LS1 flanges are available from any dealer, part number in the GM performance Cat. tube are 1 5/8, collectors are 2.5 inches.
driver side:
pass side:
as you can see the driver side had to go around the steering shaft:
Registered User
Joined: Nov 2012
Posts: 3
Likes: 0
From: maryland
You can get a nice set of SS shortys from....http://www.racinginnovationandsupply...ers_p_185.html
I have them on mine & they work great & also come with collector with O2 bungs.
I have them on mine & they work great & also come with collector with O2 bungs.
I have a set from BRP the long tube 1 7/8 stepped to 1 3/4 was going to use for a first gen s10 swap sitting in storage in IL make me a fair offer if you still want a set october. Plus there is a whole mess of good info for the swaps at s10 forum
