Pinouts and wiring diagrams
#201
Teching In
Join Date: Oct 2017
Location: western australia great victoria desert
Posts: 3
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
how did you go mate im after the same diagrams there is a few variations from what ive found so far patooyee done a excellent pinout for stand alone for e40 but im struggling to find same style diagram for e38
#204
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Would you guys have the part number for all of the harness connectors and terminals (cam sensor, mass,injectors, coil pack...)use on gen 4 engine. I’m trying to make a new harness for my 2013 6.0/6L90E
thanks
thanks
#205
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
#206
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
I’m mainly trying to find the part number for the terminals that you crimp,because I don’t like to cut and splice would rather just crimp it like factory....if I can find the part # for the connector I’ll be able to find the terminals
#207
On The Tree
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Lsxjku, its not the exact stuff for your engine, but I had found this file for the 2008-9 6.0L L76 from the G8, which is also a 6.0L. So it might help. Or search and see if you can find this file for your engine. I found this on a G8 forum. But it lists the part numbers for crimp connectors and plastic connector housing. Hope it helps. Apparently the file size is too big to post, I'll pm you.
#212
TECH Fanatic
iTrader: (7)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Go here and click on the Light Duty Vehicles to get to 1999 to 2019 GM truck and some car schematics.
https://www.gmupfitter.com/pages/body-builder-manuals
It covers the majority of the schematics you guys ask for.
https://www.gmupfitter.com/pages/body-builder-manuals
It covers the majority of the schematics you guys ask for.
The following users liked this post:
bobcratch (02-16-2021)
#214
Launching!
iTrader: (5)
#217
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Hi,
I bought a second hand harness with E38 ECM and T43 connector that the past owner thought came from a 2012 Cadillac Escalade. I believe it will have come from a 6.2 with 6l80 or 6l90.
Any chance I can get a pinout?
Thanks!
Phil
I bought a second hand harness with E38 ECM and T43 connector that the past owner thought came from a 2012 Cadillac Escalade. I believe it will have come from a 6.2 with 6l80 or 6l90.
Any chance I can get a pinout?
Thanks!
Phil
#218
Launching!
iTrader: (5)
#219
Launching!
iTrader: (5)