Conversions & Swaps LSX Engines in Non-LSX Vehicles
Sponsored by:
Sponsored by:

installed ls1 in 94 firebird HELP!!!

Thread Tools
 
Search this Thread
 
Old 03-22-2008, 08:15 PM
  #1  
Teching In
Thread Starter
 
aam742's Avatar
 
Join Date: Mar 2008
Posts: 12
Likes: 0
Received 0 Likes on 0 Posts
Default installed ls1 in 94 firebird HELP!!!

i put a Ls1 in my 94 fire bird we cannot get the number 4 coil pack to stay fired we have changed it and we have charged the computer and still the same. Does any one idea what the problem could be??? PLEASE HELP!!
Old 03-22-2008, 08:17 PM
  #2  
Banned
 
LS2TA's Avatar
 
Join Date: Mar 2008
Location: Uvalde
Posts: 64
Likes: 0
Received 0 Likes on 0 Posts
Default

u got the computer changed out to a ls1 computer?
Old 03-22-2008, 08:22 PM
  #3  
Teching In
Thread Starter
 
aam742's Avatar
 
Join Date: Mar 2008
Posts: 12
Likes: 0
Received 0 Likes on 0 Posts
Default

yes i have put and Ls1 computer in it
Old 03-22-2008, 08:27 PM
  #4  
Banned
 
LS2TA's Avatar
 
Join Date: Mar 2008
Location: Uvalde
Posts: 64
Likes: 0
Received 0 Likes on 0 Posts
Default

maybe tunning &engine harness
Old 03-22-2008, 09:15 PM
  #5  
Teching In
Thread Starter
 
aam742's Avatar
 
Join Date: Mar 2008
Posts: 12
Likes: 0
Received 0 Likes on 0 Posts
Default

the harness was the last thing that we were going to do

what can i look for in the harness to help me and i have tried 2 new ecm in it

Last edited by aam742; 03-23-2008 at 10:32 AM.
Old 03-22-2008, 10:11 PM
  #6  
Teching In
Thread Starter
 
aam742's Avatar
 
Join Date: Mar 2008
Posts: 12
Likes: 0
Received 0 Likes on 0 Posts
Default

Please can someone help me on this
Old 03-22-2008, 10:40 PM
  #7  
Staging Lane
iTrader: (6)
 
CougarL92's Avatar
 
Join Date: Feb 2007
Location: Tampa Bay
Posts: 97
Likes: 0
Received 0 Likes on 0 Posts
Default

recheck all grounds
Old 03-22-2008, 11:44 PM
  #8  
sawzall wielding director
iTrader: (4)
 
G-Body's Avatar
 
Join Date: Sep 2004
Location: Downers Grove, IL
Posts: 3,121
Received 8 Likes on 8 Posts
LS1Tech 20 Year Member
Default

Make sure that terminal A has a good ground, and terminal D has 12v with the ignition in the run and crank positions
Old 03-27-2008, 10:08 PM
  #9  
Teching In
Thread Starter
 
aam742's Avatar
 
Join Date: Mar 2008
Posts: 12
Likes: 0
Received 0 Likes on 0 Posts
Default

they have put a new harness in it and it still dont fire
Old 03-27-2008, 11:09 PM
  #10  
TECH Senior Member
iTrader: (127)
 
NemeSS's Avatar
 
Join Date: Sep 2005
Location: Houston,TX
Posts: 6,888
Received 7 Likes on 7 Posts
LS1Tech 10 Year
Default

check all coils are getting power, and ground, may be have bad coil
recheck plugs, wires, may have damaged coil or coils




All times are GMT -5. The time now is 12:36 PM.