New project pictures
Thread Starter
On The Tree
Joined: Jun 2005
Posts: 189
Likes: 0
From: Prescott, Arizona
New project pictures Posted some new pictures. Car is back on it's wheels and headers fab has begun, last move before we get ready to fire it up. We resolved all computer / wiring harness issues for FBW Throttle Body, 2006 computer use.
My little Miata (for computer purposes) will essentially "Think" it's a 6-speed GTO.
Old Hot Rodders never die, we just go faster!
- Lee
My little Miata (for computer purposes) will essentially "Think" it's a 6-speed GTO.
Old Hot Rodders never die, we just go faster!
- Lee
Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo
Thread Starter
On The Tree
Joined: Jun 2005
Posts: 189
Likes: 0
From: Prescott, Arizona
gtpvette, my jaw dropped at your beautiful GTM, SWEEET!
Yes, Billet motorplate on heads, (older construction photo) in conjunction with motor-mounts on the block, cross support picks up bell housing and tranny mount of course. No shock tower brace needed naturally! The entire engine & heads are used as a "stress-member" component in the build.
The Miata body is really all we used, the entire car is one-off fabricated, restructured underneath and uses a Ford 8.8 IRS Posi rear-end. Truth be known, it's pretty much a lot closer to really being a GTO than a Mazda or a Corvette.
Glad you like my C6 emblem, my license plate frame has a red bowtie and says Chevrolet too.
Thanks for your comments guys, you can see a few more pictures at
http://s33.photobucket.com/albums/d63/LS2V8Miata/?sc=1
- Lee
Yes, Billet motorplate on heads, (older construction photo) in conjunction with motor-mounts on the block, cross support picks up bell housing and tranny mount of course. No shock tower brace needed naturally! The entire engine & heads are used as a "stress-member" component in the build.
The Miata body is really all we used, the entire car is one-off fabricated, restructured underneath and uses a Ford 8.8 IRS Posi rear-end. Truth be known, it's pretty much a lot closer to really being a GTO than a Mazda or a Corvette.
Glad you like my C6 emblem, my license plate frame has a red bowtie and says Chevrolet too.
Thanks for your comments guys, you can see a few more pictures at
http://s33.photobucket.com/albums/d63/LS2V8Miata/?sc=1
- Lee
Last edited by LS2 V8 Miata; Mar 26, 2008 at 08:35 PM.
