You'd think that they'd pay a LITTLE bit of attention to the 2nd one that was sent out to ya! 
why are all bolt in crossmembers crap?
why are all bolt in crossmembers crap? maybe i just had some bad luck but my wife actually let spend some money so i bought a prefabbed crossmember and it fit like ***.
so i called the company and they asked me for the measurments on it, and agreed it was bad and must have been made on a friday or something, so they sent another and told me to pitch that one in the trash.
i thought cool at least they stand behind their product. so i get the new one and its almost as bad as the old one.
i have NEVER had a stock crossmember from one car to another not fit. so why is it so frickin hard to make an aftermarket one fit. i still had to mangle the new one.
the mount was way off
i had to mangle it to get it to fit
you can see how far off the mount is and the mount had ajustment and its all the way left
and there is barely a diff between the two.
so i called the company and they asked me for the measurments on it, and agreed it was bad and must have been made on a friday or something, so they sent another and told me to pitch that one in the trash.
i thought cool at least they stand behind their product. so i get the new one and its almost as bad as the old one.
i have NEVER had a stock crossmember from one car to another not fit. so why is it so frickin hard to make an aftermarket one fit. i still had to mangle the new one.
the mount was way off
i had to mangle it to get it to fit
you can see how far off the mount is and the mount had ajustment and its all the way left
and there is barely a diff between the two.
You are going to find a difference based on which mounting plates you used, which mounts you used, and which pedastals. I can easily envision that much error just in plate diferences...
yeah but the plates dont have anything to do with the frame. this p.o.s. didnt fit the frame.
this is just a plain jane 68 camaro. if it was some crazy custom job i wouldnt gripe. now i have to figure out what way to kill the extra crossmember.
should i set it on fire or blow it up, or maybe make a piece of art out of it!!!
Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo
i cant say who made um cuz they are not a sponsor. and i just didnt feel like bothering to make one. i had to make everything pretty much so far and im getting lazy. it just sucked that the one thing i spentt big bucks on turned out to be crap.
TECH Regular
Joined: May 2005
Posts: 406
Likes: 0
From: Bay Area, CA
Say it anyway. I don't think any companies that pay to be here would mind us avoiding their competition. Not like this is a good review so people will run out to buy their product.
