My brother has an opportunity to get a cheap 6.0 denali engine out of a 2004. Can he use this engine in his 1998 z28? He will be using a t-56 manual, and the 98 pcm, and I'm not sure if the signal from the crank will be the same, and if the t-56 will fit if the crank is longer or different, or what not.

I've heard some rumors that there might be some issues.. Anybody got any advice?

Thanks alot,
Josh

 

No problems at all will, have to swap a few things , that is a LQ9 they are rated at 345 stock , 80lbs extra weight though