3800RS

iTrader: (15)

ek... what did you wind up doing ?

98Camarod

iTrader: (43)

I did the thermostat housing thing

Andy1

I would hesitate at plumbing the steam vent to the suction side of the cooling system (thermostat housing neck). It would seem to me you'd be re-introducing the air you're trying to purge out right back into the block/heads.

Andy1

SMAX

iTrader: (11)

I just ordered one of these http://www.jegs.com/i/Moroso/710/63745/10002/-1 and spliced it into the upper radiator hose. Its simple.

98Camarod

iTrader: (43)

Unless you have metal hoses like I do.

3800RS

iTrader: (15)

interesting. I may just use the ls1 rad with the 2 nipples

3800RS

iTrader: (15)

if i run the steam hose to the throttlebody, can i run the other throttlebody nipple to a tap off of the overflow ?

SMAX

iTrader: (11)

No, you will just fill up the over flow. If you are using regular radiator hoses (non-metalic) just order the part I showed earlier. Easiest solution to this problem.

3800RS

iTrader: (15)

was hoping to do something today

SMAX

iTrader: (11)

Any local speed shop will have them. Even a local parts store may have them.

Project GatTagO

iTrader: (7)

Check out Jags that Run. They have nice aluminum couplers just for this kind of install. Much nicer than the Moroso part.

Andrew