1981 Olds 98 turbo LS swap
Was going to use the stock hanger and install a pump. But the stock tank isn't baffled and I couldn't find one that was. So I decided to weld on a sump. Drilled some holes, modified the sump for the shape of the tank and welded her up. Used water to find any pin holes and welded them shut.
Trending Topics
The Best V8 Stories One Small Block at Time
never mind i just reread its going to be turbo. I forgot about that while i read thru the thread.
Last edited by hot98z28; Yesterday at 10:24 PM.








