Need a new top
Need a new top Ok, so it is time. I still have the original top on the vert from 98 so it is time to get a new one. Anyone got any recommendations? If I did it myself any advice? Thanks
TECH Regular
Joined: Aug 2008
Posts: 459
Likes: 18
Nice. I have a 2000 NBM with tan interior and top. Which one matches the factory top? Tan? Lt. Neutral? Beige? I'm guessing the Tan cloth? The factory tan top is canvas, correct?
Edit: Dur. Just read the Tops On Line page a bit closer....
Factory material for all colors except White is Stayfast Cloth, only White color top came with Pinpoint Vinyl from factory.
Nevermind.
Edit: Dur. Just read the Tops On Line page a bit closer....
Factory material for all colors except White is Stayfast Cloth, only White color top came with Pinpoint Vinyl from factory.
Nevermind.
Last edited by Saturn5; Jan 5, 2010 at 10:51 PM.
I replaced my top myself. I got the top from an ebay seller that included an instructional dvd that shows the process on a Firebird. Once you watch the dvd a couple of times, the job does not seem so intimidating at all. Get an electric staple gun from Lowes or Wal-Mart. They cost about $30. You don't need the heavy duty kind, just the ones that shoot the usual 1/2" staples.
Allow yourself a full day, mainly because you will be glueing stuff down, then pulling it up and redoing it because you find places where you can make it better. But it is really not that bad. Other than the staple gun, no special tools are needed.
Allow yourself a full day, mainly because you will be glueing stuff down, then pulling it up and redoing it because you find places where you can make it better. But it is really not that bad. Other than the staple gun, no special tools are needed.
Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Topdon ONE vs. Artidiag 800 BT2: Which is the Diagnostic Tablet For You?
Pouria Savadkouei
Gas Monkey Built a 6-Wheel Ferrari Testarossa With a Corvette LT4 Engine
Verdad Gallardo
7 Most Reliable High-Performance Engines GM Has Ever Built
Verdad Gallardo
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin
Verdad Gallardo
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo LOL!!! Exactly what happened the last time I posted about this.
I actually ended up sending it to another user on this site. I wasn't able to copy the dvd at the time so I just sent him the disk. PM future_z_owner. Maybe he still has the one I sent him and can copy it for you.
I actually ended up sending it to another user on this site. I wasn't able to copy the dvd at the time so I just sent him the disk. PM future_z_owner. Maybe he still has the one I sent him and can copy it for you.
Teching In
Joined: Jan 2010
Posts: 37
Likes: 0
From: Redford, Mi
this summer my rear window fell out. It ripped alot of the top and I was really bummed out. My dad sticked it together and glued the window back in place but he said I need a new top in a year. Thanks for telling me about that site and it's nice to know others have been in the same spot as me
I replaced my rear window curtain with the tops on line product. Other than the pain of the monkey snot on all over the rail holding the rear of the top/window in place, and the fact that I had to remove the center rivit to get the old one out, it really wasn't that hard of a job. I used a manual staple gun too. The rest of the top is next, but it's holding up pretty well (which is why I didn't do it all at once).