roll bar/cage
#24
My Wolfe 4-pt is on its way for delivery next week (they have a 10% off promotion right now till 6-May!) -- hope the bolt-in is not too big of a pain in the **** -- any tips for install?
Looks like it's not too bad... http://www.wolferacecraft.com/instal...odbarconv.aspx
Update: Looks like with that plate in the back it barely covers any of the rear shock holes, so fitting the Koni shock adjuster tool in there should be no issue
Looks like it's not too bad... http://www.wolferacecraft.com/instal...odbarconv.aspx
Update: Looks like with that plate in the back it barely covers any of the rear shock holes, so fitting the Koni shock adjuster tool in there should be no issue
Last edited by libertyforall1776; 05-06-2013 at 10:33 AM. Reason: added link/detail
The following users liked this post:
99MERICA (07-14-2019)
#25
Looks like these guys are a LOT less expensive -- doh!
http://www.midwestchassis.com/roll-b...cessories.html
http://www.midwestchassis.com/roll-b...cessories.html
#26
Not really that much cheaper unless I am missing something, looks like bare not powder coated and weld in only?
Man you will be very happy with the Wolfe roll bar, the powder coat was perfect on mine and install was simple!
Man you will be very happy with the Wolfe roll bar, the powder coat was perfect on mine and install was simple!
#28
Two little kids will fit in the back no problem with the roll bar... My wife has had to sit in the back and she fit just fine with the roll bar and she is 5'4". My brother sat in the back once to see if it would hit his head and once he sat down the bar wasn't in his way that I recall... though there was no leg room and he hit his head getting in at out. Lol
#33
If you have swingouts then really the low slung is really void.
#38
I think that is an RK Sport Light Bar in which case they are no longer made. You might find one on eBay or the forum classifieds. As I understand, they are only for looks. There is no safety benefit.
This is not my car but it is another example
This is not my car but it is another example
#39
Im fairly sure all convertibles come from the factory with sub connectors.
#40
The following users liked this post:
BigBlockNBK (04-10-2021)