where I have ? I just don't know the answer. Scale wasn't on that day, and I don't know my rear ratio, I assume it's stock so, 3.27 was it for stock? |
GU6 = 3.42 GU5 = 3.23 GU4 = 3.08 GU2 = 2.73 dont know the rpo code for other gear ratios... |
oh ok, GU6 on my door so 3.42 assuming the previous owner left it alone |
oh yeah i forgot to tell you im a M6 not an A4 |
ppssss, you have two # 3's |
**updated** |
Originally Posted by anotherreject04 ppssss, you have two # 3's |
:engarde: :chug: |
Originally Posted by Shooter_Jay :engarde: :chug: |
i cant spell but i can count hahaha jk |
12.692 @ 113.63 w/ 2.144 60' before the torque converter.Need to get some new times now. 1999 WS6 convertible 3860 lbs w/ driver. Procharger P1SC1 @ 7 lbs, pacesetter LT's, catted Y, Borla. 4L60E with TCi kit and Fuddle 3000, 2.0 STR. Stock internals, heads, intake, etc. |
Originally Posted by Chas1 12.692 @ 113.63 w/ 2.144 60' before the torque converter.Need to get some new times now. 1999 WS6 convertible 3860 lbs w/ driver. Procharger P1SC1 @ 7 lbs, pacesetter LT's, catted Y, Borla. 4L60E with TCi kit and Fuddle 3000, 2.0 STR. Stock internals, heads, intake, etc. |
You can post those times, I don't know when I'm getting back to the track. My 60' time was killing my ET. And yes that is with a pretty much stock LS1 with a Procharger. |
Originally Posted by Chas1 You can post those times, I don't know when I'm getting back to the track. My 60' time was killing my ET. And yes that is with a pretty much stock LS1 with a Procharger. |
He says he has a converter now which will probably bump him a 1/2 sec. or so (assuming he gets decent tires). My first time out after going with the blower netted a 12.95@108 (that was the G-trim though). I've slowly worked it down into the tens. |
Originally Posted by Dustin Geezus! Wanna run em for money? lol, mine is stock internals and a few bolts on, untuned and stumbling but i am sure i will getcha. :) Do you go to any HPD meets? |
Ive done a few things since my times too....i know Im in the high 11s for sure. :devil: |
60 ft=1.502 :drive: 1/8 7.343 1/8 mph 93.040 1/4 11.603 1/4 mph 112.420 :gay: https://ls1tech.com/forums/11-second-club/408780-finally-11-s-stock-lt1-motor.html http://videos.streetfire.net/Player....4-65268F59C06E http://videos.streetfire.net/player....4-B60643BE5259 |
Representn' from St. Louis 60' = 1.723 1/8 = 8.058 1/4 = 12.614 @109.14 |
i ran 13.6@104 2.36 60ft 8.8 1/8@84... 2001 Trans AM half a tank of gas. weight unknown all stock. i have now ran 8.6@85 mph in the 1/8 with a 2.19 60ft. ill try and find my 1/4 slip. ill post my 1/8 tommorow |
All times are GMT -5. The time now is 05:06 AM. |
© 2024 MH Sub I, LLC dba Internet Brands