6 point pics
6 point pics this is a wolfe 6 point bolt in. i will never buy this part again. nothing lined up well at all and i had to buy all new longer bolts, if i do it again ill def do a weld in, and prob try a strano, and the door bars suck getting in and out....
the front door bar mount holes were dead on top of the frame walls and the undercar plates they gave me had 4 holes in each corner perfectly spaced out, prob is the plates on the bars didnt have perfectly spaced holes on them so only 3 of the 4 holes lines up.
Sorry to hear the troubles. IMO, Wolfe has the best production rollbar out there. I've installed about 6 of them and never had any problems (bolt in or weld in). You're not going to find any easier "legal" side bars for getting in/out of the car.....Wolfe's are EASY compared to most.
The car looks great though
Jason
The car looks great though
Jason
Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo
Launching!
Joined: May 2004
Posts: 210
Likes: 1
From: Merritt Island, Florida
Sorry to hear your troubles...the guy that installed mine said it was a bitch too, a couple of bolts anyhow. I think he just drilled all the way through the floor in the end, right through my subs and through the bottom plate, then had to get longer bolts.
, I have swingouts,,, if anyone else is getting a rollbar, and it's a daily driver, you must get swingouts!
I take my swing outs out 1/2 the year when not at the track, so it's like there is no roll bar in the car now as far as convenience. (Front passengers only though!) . I capped the upper side off, Tbyrne/ Wolfe and others sell the little press on aluminum covers that look good. '
Also - and this sounds cheesy but it's not...I had this idea, you can put black (or whatever color) neoprene beer bottle coolers over the short parts left on the floor swingouts, so you don't smash your ankle on them. works great.
Ram
, I have swingouts,,, if anyone else is getting a rollbar, and it's a daily driver, you must get swingouts!
I take my swing outs out 1/2 the year when not at the track, so it's like there is no roll bar in the car now as far as convenience. (Front passengers only though!) . I capped the upper side off, Tbyrne/ Wolfe and others sell the little press on aluminum covers that look good. '
Also - and this sounds cheesy but it's not...I had this idea, you can put black (or whatever color) neoprene beer bottle coolers over the short parts left on the floor swingouts, so you don't smash your ankle on them. works great.
Ram
