Help a 1st gen brother out? Need pics of front belt retractor mounting
07-03-2007, 01:55 PM
#1
Teching In
Thread Starter
Join Date: Jun 2007
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
Help a 1st gen brother out? Need pics of front belt retractor mounting Well, I have struck out on my normal hangout at Team Camaro, so I figured maybe one of my 4th gen brethren can help me out.
I have a 69 vert that I am trying to retrofit 4th gen vert seatbelts in. I have seen at least one 68 vert with 4th gen vert belts, but the owner didn't have any pictures of how the front retractor was mounted. So, I'm trying to fab something.
I was hoping to find a picture of a 4th gen vert front retractor in its natural habitat, installed to the structure of the car but without the side panels on. I have the GM parts diagram, but I'd like to see it in sheetmetal form if anyone can share.
TIA!
Eric
I have a 69 vert that I am trying to retrofit 4th gen vert seatbelts in. I have seen at least one 68 vert with 4th gen vert belts, but the owner didn't have any pictures of how the front retractor was mounted. So, I'm trying to fab something.
I was hoping to find a picture of a 4th gen vert front retractor in its natural habitat, installed to the structure of the car but without the side panels on. I have the GM parts diagram, but I'd like to see it in sheetmetal form if anyone can share.
TIA!
Eric
08-02-2007, 10:18 AM
#3
Launching!
iTrader: (3)
Join Date: Aug 2005
Location: Addison, Texas
Posts: 215
Likes: 0
Received 0 Likes
on
0 Posts
These are from my 1999 WS6. Everything is loose except the guide at the top.
Old belt is completely gone.
Replacement belt installed.
Hope these help.. Tom Ballenger
Old belt is completely gone.
Replacement belt installed.
Hope these help.. Tom Ballenger
