10.34 Bolt-On Only C6Z
Thread Starter
Launching!
Joined: Oct 2008
Posts: 260
Likes: 0
10.34 Bolt-On Only C6Z Made a trip to Atco on Tuesday. Ran a 10.34 @ 132+ with a 1.44 60'.
Here we go.
Mods
Bolt-Ons Only
American Racing Headers
Vette -Air
Ported TB & Manifold
CAI
RPS LSX BC2 Clutch
4.10 gears
Assembled by Tommy (AMR) , robz , myself
Tuned by Troy on Tune Time's Mustang Dyno (489 HP 445 TQ)
I would like to thank the following people for their fine products:
Nick of American Racing Headers - Still the record holding headers. None are better.
Rob of RPS Clutches - This clutch is a dream to drive on the street and produces great 60's.
Carlos of Vette-Air - The system provides the cold air that's needed plus Carlos is a great guy just to bounce ideas off of.
Thanks to :
Ranger for providing sound advice.
Tommy for his out of the box thinking and implementation.
Matt of Tune Time for providing his assistance on the Dyno.
Mark of Tirecraft and Kyle for bailing me out of a jam in the rain.
Troy for giving me a great tune and onboard analysis.
Robz for always encouraging, analyzing, and eeking out every drop of performance from both man and machine.
Track prep was very good but changed through out the day. The DA according to Dragtimes was slightly above sea level at the time of this pass.
Here we go.
Mods
Bolt-Ons Only
American Racing Headers
Vette -Air
Ported TB & Manifold
CAI
RPS LSX BC2 Clutch
4.10 gears
Assembled by Tommy (AMR) , robz , myself
Tuned by Troy on Tune Time's Mustang Dyno (489 HP 445 TQ)
I would like to thank the following people for their fine products:
Nick of American Racing Headers - Still the record holding headers. None are better.
Rob of RPS Clutches - This clutch is a dream to drive on the street and produces great 60's.
Carlos of Vette-Air - The system provides the cold air that's needed plus Carlos is a great guy just to bounce ideas off of.
Thanks to :
Ranger for providing sound advice.
Tommy for his out of the box thinking and implementation.
Matt of Tune Time for providing his assistance on the Dyno.
Mark of Tirecraft and Kyle for bailing me out of a jam in the rain.
Troy for giving me a great tune and onboard analysis.
Robz for always encouraging, analyzing, and eeking out every drop of performance from both man and machine.
Track prep was very good but changed through out the day. The DA according to Dragtimes was slightly above sea level at the time of this pass.
Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Gifts Neither Your Dad Nor Grad Will Shove Into the 'Trinket Drawer'
Brett Foote
Topdon ONE vs. Artidiag 800 BT2: Which is the Diagnostic Tablet For You?
Pouria Savadkouei
Gas Monkey Built a 6-Wheel Ferrari Testarossa With a Corvette LT4 Engine
Verdad Gallardo
7 Most Reliable High-Performance Engines GM Has Ever Built
Verdad Gallardo
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin
Verdad Gallardo
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Restricted User
Joined: May 2009
Posts: 295
Likes: 0
Thread Starter
Launching!
Joined: Oct 2008
Posts: 260
Likes: 0
So as to not give you bad info, please contact tomdcarguy (Tommy at Anger Management Racing). He built and adapted the C6 rear to my Z06. Cooler is functional.
Yo Gary, congrats....it was a great day, had a blast hanging out with ya, just sorry I missed your best pass, that car is flying! I keep watching your car run I'm gonna have to trade my Z in for one!
nice 60 Thread Starter
Launching!
Joined: Oct 2008
Posts: 260
Likes: 0
