How fast did you run your C5Z bone stock?
#1
Teching In
Thread Starter
Join Date: Nov 2010
Location: Indiana
Posts: 27
Likes: 0
Received 0 Likes
on
0 Posts
How fast did you run your C5Z bone stock?
Hey guys I was just watchin some old motortrend and motorweek vids of the C5Z and was curious if any of you guys were able to best their times of 12.5 and 12.4 bone stock. I don't own a vette but just like to see/hear about people bangin the gears!
#7
It takes headers + cai + sticky tires for most people to run consistent high-mid 11s.
Trending Topics
#8
#11
TECH Enthusiast
iTrader: (2)
I wish I could have run the car at low sea level and low DA. But that's just how it goes.
#12
Average drivers in the right conditions will run 12.6-12.8. Good drivers in crappy conditions run about the same. I've heard of crappy drivers running high 13's and low 14's. (In fact I know one of them.)
I wish I could have run the car at low sea level and low DA. But that's just how it goes.
I wish I could have run the car at low sea level and low DA. But that's just how it goes.
#13
I never post, but I ran 11.9s consistantly @116 with drs only when I had my c5z. My 06 m6 with Fast 102, headers and tune runs 12.2 on runflats @118-120. Judging from my mph, my LS2 needed a few mods to compete.
#14
DRs will greatly assist traction when launching; however, the OEM F1s could provide excellent 60's on a well prepped track. (1.8x much of the time with an occasional 1.7x mixed in) A good launch technique along with correct tire pressure is a must. There is a fine line between bogging, spinning, and possibly overpowering the clutch although the OEM clutch worked extremely well.
#16
On The Tree
iTrader: (1)
Join Date: Jul 2005
Location: From Indy now San Diego
Posts: 176
Likes: 0
Received 0 Likes
on
0 Posts
Wow GARY2004Z06, I remember seeing your record bolt-on c5 z06 times on the vette forum, but after seeing your c6 times too, I'm sure you'll be remembered as "legendary" in the annals of vette history for your times, haha. Unbelievable times.
#17
I went 12.8@112 with a bone stock 01 in 2600 da with a 2.0 60ft practically bogging it out the hole and still getting some tire spin in first gear. Tried some more throttle and went 13.8@ 111. This was my first time at the track with it.
EDIT: just looked at the timeslips my 12.80 runs were on 2.1 60fts
EDIT: just looked at the timeslips my 12.80 runs were on 2.1 60fts
Last edited by BoostedSS; 06-28-2011 at 05:03 PM.