Pics of CCW 505 please!
Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Topdon ONE vs. Artidiag 800 BT2: Which is the Diagnostic Tablet For You?
Pouria Savadkouei
Gas Monkey Built a 6-Wheel Ferrari Testarossa With a Corvette LT4 Engine
Verdad Gallardo
7 Most Reliable High-Performance Engines GM Has Ever Built
Verdad Gallardo
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin
Verdad Gallardo
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
I should be getting a set of 19X13's & 19X10's at the end of this week. I'll be installing it on a 2003MY Black Z06. I'm going to wait and see on the ACP fender flares. I've been told that they will extend past the wheel well aprox. 1/5" to 3/4". There is a pic on the breathless Performance website (http://www.breathlessperformance.com/), under wheels section, of a red Z06 with the wide wheel package on stock fenders.
Teching In
Joined: Sep 2002
Posts: 30
Likes: 0
From: tacoma wa
if you are getting the CCW 505A wheels ...they only come in 19x10frt and 19x11 rear......they stick out about 1/2 inch which is perfect...i have my car lowered and have no problems at all
Originally Posted by Earl H
I should be getting a set of 19X13's & 19X10's at the end of this week. I'll be installing it on a 2003MY Black Z06. I'm going to wait and see on the ACP fender flares. I've been told that they will extend past the wheel well aprox. 1/5" to 3/4". There is a pic on the breathless Performance website (http://www.breathlessperformance.com/), under wheels section, of a red Z06 with the wide wheel package on stock fenders.
184, they also come in 19X13 for Vettes and Vipers. I've got a set coming, check with John at CCW for more info. As I said before, if you get the 19X13 they stick out about 1/2 to 3/4". I've seen pics of the larger wheels on a stock fendered vehicle. It didn't look to bad. Some guys who go with the big set install AGP fenders which flare out about 3/4". I'll know for sure this weekend.
Teching In
Joined: Sep 2002
Posts: 30
Likes: 0
From: tacoma wa
way cool........i have only had mine for a few months and john told me then that there would be no other sizes available........maybe i will minitub mine and put some bigger tires out back.....now if only he would make them in 18's
Thread Starter
Teching In
Joined: Feb 2004
Posts: 44
Likes: 0
From: San Angelo, Texas
Originally Posted by corvette184
way cool........i have only had mine for a few months and john told me then that there would be no other sizes available........maybe i will minitub mine and put some bigger tires out back.....now if only he would make them in 18's
TECH Fanatic
Joined: Mar 2003
Posts: 1,112
Likes: 0
From: Dallas
19x13 WILL REQUIRE A TUB.
I talked to a sponsor that sells them and even a car that was tubbed and was lowered had some rubbing issues.
He recommended to me that I get a tub job and get the ACP wide fenders if my car was slammed. I ended up getting the 19x11s instead.
I talked to a sponsor that sells them and even a car that was tubbed and was lowered had some rubbing issues.
He recommended to me that I get a tub job and get the ACP wide fenders if my car was slammed. I ended up getting the 19x11s instead.
You are right, the Big Package will require a tub (already done). Re: rubbing, I'm going to have to wait and see. I test fit the wheels on a friends tubbed car and it looks like the wheels will stick out about 1/4 to 1/2". About the same as the CCS 11.5" Classic Wheels. If it sticks out to much on my car, I'll do the ACP fenders. My car is lowered, but not slammed.