New! KATECH carbon fiber rear decklid with lexan window -33lbs
#1
New! KATECH carbon fiber rear decklid with lexan window -33lbs
Just released at the PRI show, Katech's new carbon fiber rear decklid combines good looks with massive weight savings.
-33lb weight savings
-Comes with window installed, ready to bolt on
-3 finishes available
-Retains hinges, latch, and lift support
-Includes carbon fiber longitudinal brace
-Only requires one decklid support
-Ships truck freight
Finishes:
1 Primered top and bottom, ready for prep/paint
2 Race quality carbon - carbon exposed top, carbon exposed bottom with some blackout
3 Show quality carbon - completely exposed carbon top and bottom
Made to order. Please allow 5 weeks for delivery.
Prices:
Decklid assembly with window
Primered $2999.99
Race carbon $3299.99
Show carbon $3699.99
http://store.katechengines.com/carbo...ndow-p293.aspx
Decklid only - install your own window (for professionals and ambitious do-it-yourselfers)
Primered $2299.99
Race carbon $2599.99
Show carbon $2999.99
http://store.katechengines.com/carbo...klid-p294.aspx
Here are some initial pics. I'll post more when I get home and get them from my camera.
Race carbon - no window
Race carbon inside - no window
Race carbon with window. Black trim around the edges will not be on production pieces (prototype shown)
-33lb weight savings
-Comes with window installed, ready to bolt on
-3 finishes available
-Retains hinges, latch, and lift support
-Includes carbon fiber longitudinal brace
-Only requires one decklid support
-Ships truck freight
Finishes:
1 Primered top and bottom, ready for prep/paint
2 Race quality carbon - carbon exposed top, carbon exposed bottom with some blackout
3 Show quality carbon - completely exposed carbon top and bottom
Made to order. Please allow 5 weeks for delivery.
Prices:
Decklid assembly with window
Primered $2999.99
Race carbon $3299.99
Show carbon $3699.99
http://store.katechengines.com/carbo...ndow-p293.aspx
Decklid only - install your own window (for professionals and ambitious do-it-yourselfers)
Primered $2299.99
Race carbon $2599.99
Show carbon $2999.99
http://store.katechengines.com/carbo...klid-p294.aspx
Here are some initial pics. I'll post more when I get home and get them from my camera.
Race carbon - no window
Race carbon inside - no window
Race carbon with window. Black trim around the edges will not be on production pieces (prototype shown)
Trending Topics
#12
TECH Fanatic
iTrader: (10)
Jason, can you explain the differences between the race finish and the show quality please? What does "completely exposed" mean and same for the "blackout part"?
Could you drive the race finish on the street in nice weather or what would be needed to make that possible? Is there any protection or chemicals on the show quality compared to the race that makes it more suitable to the elements or it in merely a production quality thing? Thanks
That thing would look bad on an all black vette with CF hood and wheels!
Could you drive the race finish on the street in nice weather or what would be needed to make that possible? Is there any protection or chemicals on the show quality compared to the race that makes it more suitable to the elements or it in merely a production quality thing? Thanks
That thing would look bad on an all black vette with CF hood and wheels!
#13
Jason, can you explain the differences between the race finish and the show quality please? What does "completely exposed" mean and same for the "blackout part"?
Could you drive the race finish on the street in nice weather or what would be needed to make that possible? Is there any protection or chemicals on the show quality compared to the race that makes it more suitable to the elements or it in merely a production quality thing? Thanks
That thing would look bad on an all black vette with CF hood and wheels!
Could you drive the race finish on the street in nice weather or what would be needed to make that possible? Is there any protection or chemicals on the show quality compared to the race that makes it more suitable to the elements or it in merely a production quality thing? Thanks
That thing would look bad on an all black vette with CF hood and wheels!
The blackout part can be seen in this image.
#14
I would really like to see one of these installed to see the fitment and how it would look both painted and raw Cf. I'm fairly interested in this. How much weight will I be saving from my stock set up to yours? For people to spend that cash on a hatch there not worried about 20lbs saved but more for the looks.. I attend to care about both
#15
I would really like to see one of these installed to see the fitment and how it would look both painted and raw Cf. I'm fairly interested in this. How much weight will I be saving from my stock set up to yours? For people to spend that cash on a hatch there not worried about 20lbs saved but more for the looks.. I attend to care about both
-34lbs on the show carbon
There are a lot of pics here
http://forums.corvetteforum.com/1579669656-post180.html
The black trim around the edge is not in the production versions.