NEW PB FRC new mods (A&A) kit
#1
12 Second Club
Thread Starter
iTrader: (2)
Join Date: Mar 2007
Posts: 173
Likes: 0
Received 0 Likes
on
0 Posts
NEW PB FRC new mods (A&A) kit
I previously ran a 11.9's at 114ish with full bolt ons gears an clutch, I finally decided to pull the trigger and bought a A&A V3 black kit, and picked the car up friday night, and went to pony wars saturday, I drove the car about 30 miles and never got passed about 3500 without blowing the tires off.
1st pass 11.60 @130.9 mph!!!!!!!! with 2.1 60'
was actually pretty scary ride
2nd pass 11.34 @129.57 mph with a 1.91 60' blew dip stick out this pass
3rd pass 11.24 @128.84 mph
got out of it before end of traps, car felt like it broke up a bit so got out of it, 1.82 after this pass had a little tick on left side, thought it was an exhaust leak but with a new setup, and crankcase pressure decided to call it a day.
Car was trapping 101-102 in the 1/8
Now just gotta make sure all is well and try and get back out there.
1st pass 11.60 @130.9 mph!!!!!!!! with 2.1 60'
was actually pretty scary ride
2nd pass 11.34 @129.57 mph with a 1.91 60' blew dip stick out this pass
3rd pass 11.24 @128.84 mph
got out of it before end of traps, car felt like it broke up a bit so got out of it, 1.82 after this pass had a little tick on left side, thought it was an exhaust leak but with a new setup, and crankcase pressure decided to call it a day.
Car was trapping 101-102 in the 1/8
Now just gotta make sure all is well and try and get back out there.