Kook Header results
07-09-2004 | 02:15 PM
#1
Thread Starter
LS1Tech Sponsor
iTrader: (12)
Joined: Nov 2001
Posts: 14,865
Likes: 6
From: Bridgewater,Ma
Kook Header results Before #'s were 325hp/345tq with Vararam and Z06 cat back,LS1 Edit tuned
Just swapped in Kook 1 7/8 longtubes and there 3" X pipe without Cats and made 345hp/365tq with A/F at 12.3-1 across the board.
Gained power everywhere.
Just swapped in Kook 1 7/8 longtubes and there 3" X pipe without Cats and made 345hp/365tq with A/F at 12.3-1 across the board.
Gained power everywhere.
L..G's are good also. 
07-18-2004 | 04:28 PM
#7
TECH Fanatic
Joined: Aug 2002
Posts: 1,399
Likes: 0
From: katy, tx
I gained 80 ft lbs at 3000 rpms with the Kooks headers and x-pipe with high flow cats and around 50 ft lbs at 3500 rpms and by 4000 it was a constant 20 over stock. Really flattened the torque curve and woke up the car at low rpms!
Dean
Dean
Last edited by 69Vette03; 07-21-2004 at 12:27 PM.
