WOW!! MTI and Kooks Makes The Power!
WOW!! MTI and Kooks Makes The Power! Purchased 1-3/4" Kooks long tubes with the hi-flow cats and 3" x-pipe from MTI here in Houston. They did the install also, excellent job by the way. They attended to all of my concerns and treated me like I was spending a million dollars. 
Only PCM work done was delete the rear O2 sensors, lower the temps for the fan "on" and delete the CAGS. No A/F tuning was done so I'm sure there's a little more to be had. I'll wait until I do a cam for that. Only engine mods I had previously were a Blackwing and power duct.
I witnessed the "after" dyno runs and was very surprised to see 340hp pop up. A gain of 31hp and plenty of torque, see chart below. Big seat of the pants improvement and the sound thru the B&B PRT's now is just pure "woodyville".
Only PCM work done was delete the rear O2 sensors, lower the temps for the fan "on" and delete the CAGS. No A/F tuning was done so I'm sure there's a little more to be had. I'll wait until I do a cam for that. Only engine mods I had previously were a Blackwing and power duct.I witnessed the "after" dyno runs and was very surprised to see 340hp pop up. A gain of 31hp and plenty of torque, see chart below. Big seat of the pants improvement and the sound thru the B&B PRT's now is just pure "woodyville".
TECH Fanatic
Joined: Aug 2002
Posts: 1,399
Likes: 0
From: katy, tx
Originally Posted by blazeone
Purchased 1-3/4" Kooks long tubes with the hi-flow cats and 3" x-pipe from MTI here in Houston. They did the install also, excellent job by the way. They attended to all of my concerns and treated me like I was spending a million dollars. Only PCM work done was delete the rear O2 sensors, lower the temps for the fan "on" and delete the CAGS. No A/F tuning was done so I'm sure there's a little more to be had. I'll wait until I do a cam for that. Only engine mods I had previously were a Blackwing and power duct.
I witnessed the "after" dyno runs and was very surprised to see 340hp pop up. A gain of 31hp and plenty of torque, see chart below. Big seat of the pants improvement and the sound thru the B&B PRT's now is just pure "woodyville".
Only PCM work done was delete the rear O2 sensors, lower the temps for the fan "on" and delete the CAGS. No A/F tuning was done so I'm sure there's a little more to be had. I'll wait until I do a cam for that. Only engine mods I had previously were a Blackwing and power duct.I witnessed the "after" dyno runs and was very surprised to see 340hp pop up. A gain of 31hp and plenty of torque, see chart below. Big seat of the pants improvement and the sound thru the B&B PRT's now is just pure "woodyville".
Dean
