Magnacharger Supercharger
Thread Starter
Staging Lane
Joined: Sep 2004
Posts: 85
Likes: 0
Magnacharger Supercharger Is any one running the magnacharger supercharger? I was wondering how far the front of it slopes down to reach the stock intake system? I was also wondering how much height it added to the engine?
11 Second Club
Joined: Nov 2001
Posts: 1,320
Likes: 0
From: NE PA
Originally Posted by Cobra20
Is any one running the magnacharger supercharger? I was wondering how far the front of it slopes down to reach the stock intake system? I was also wondering how much height it added to the engine?
what he said. a specific hood has to be used. there are a few on the market. Ken Grody ford in cali has two to choose from. ACI has one for sure i know. RK sport has some also. there are others, but you have to make sure its for the magnuson.
Thread Starter
Staging Lane
Joined: Sep 2004
Posts: 85
Likes: 0
Well the engine will not being going into a Corvette but I want to use the Magnacharger supercharger on the engine. The car will end up with a custom made hood any ways I just need to find the size of the supercharger so I know how big to make the cowl on the hood.
11 Second Club
Joined: Nov 2001
Posts: 1,320
Likes: 0
From: NE PA
Originally Posted by Cobra20
Well the engine will not being going into a Corvette but I want to use the Magnacharger supercharger on the engine. The car will end up with a custom made hood any ways I just need to find the size of the supercharger so I know how big to make the cowl on the hood.
http://www.magnacharger.com/
Good luck!
Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo 11 Second Club
Joined: Nov 2001
Posts: 1,320
Likes: 0
From: NE PA
Originally Posted by Snow Dog
whereas the vette one slopes down at a very hard angle.
Thread Starter
Staging Lane
Joined: Sep 2004
Posts: 85
Likes: 0
The reason I want to use the Corvette supercharger is because the intake slopes down at that angle. I was thinking with the intake sloping down I could build the hood for my car similar to the GT40 with the twin exhaust areas for the radiator. Then I could run the air intake down the middle then in front of the radiator. Another way is to run it in front of the radiator then have it split so the air intake is kind of like this. The hood I want to build will look similar to this one.
yes the vara ram will work with a magnuson.
cobra your gonna have to talk with magnacharger about the deminsions. i think youve got a good idea, im just not sure on the clearences that your going to need.
cobra your gonna have to talk with magnacharger about the deminsions. i think youve got a good idea, im just not sure on the clearences that your going to need.
