Baseline dyno result.
Thread Starter
TECH Regular
Joined: Nov 2001
Posts: 402
Likes: 0
From: STL
Baseline dyno result. My 03 Z06 is bone stock and I wanted to dyno her to establish a baseline.
Dyno'ed 351 rwhp/348 rwtq, my AFR was bit on rich side. I'm not disappointed with the numbers, I think it is in the "norm" range of stock Z06.
I am supposed to receive VR/B2 and Stacker today and will install it on Saturday and do another dyno after computer relearn.
Next will the long tubes.
Dyno'ed 351 rwhp/348 rwtq, my AFR was bit on rich side. I'm not disappointed with the numbers, I think it is in the "norm" range of stock Z06.
I am supposed to receive VR/B2 and Stacker today and will install it on Saturday and do another dyno after computer relearn.
Next will the long tubes.
6600 rpm clutch dump of death Administrator
Joined: Dec 2001
Posts: 4,983
Likes: 13
From: Texas
My car dyno'd 358 and 359 with 1100 miles on the car. 356 and 357 with 4700 miles.
I pulled the airbox lid (the zip tie mod) and went to 372RWHP.
350-360 is the norm on Z06s, and the cars are a bit rich from the factory.
I'm not a fan of the VR, as for the LT, I'd look at LGM.
I pulled the airbox lid (the zip tie mod) and went to 372RWHP.
350-360 is the norm on Z06s, and the cars are a bit rich from the factory.
I'm not a fan of the VR, as for the LT, I'd look at LGM.
11 Second Club
Joined: Nov 2001
Posts: 1,320
Likes: 0
From: NE PA
Originally Posted by AOC SS
My 03 Z06 is bone stock and I wanted to dyno her to establish a baseline.
Dyno'ed 351 rwhp/348 rwtq, my AFR was bit on rich side. I'm not disappointed with the numbers, I think it is in the "norm" range of stock Z06.
I am supposed to receive VR/B2 and Stacker today and will install it on Saturday and do another dyno after computer relearn.
Next will the long tubes.
Dyno'ed 351 rwhp/348 rwtq, my AFR was bit on rich side. I'm not disappointed with the numbers, I think it is in the "norm" range of stock Z06.
I am supposed to receive VR/B2 and Stacker today and will install it on Saturday and do another dyno after computer relearn.
Next will the long tubes.
Good to see you, compadre!
Thread Starter
TECH Regular
Joined: Nov 2001
Posts: 402
Likes: 0
From: STL
Originally Posted by XTrooper
Those numbers look just about right to me!
Good to see you, compadre!
Good to see you, compadre!
Hey Steve, hope everything is going well for you and your family.
My wife is wondering why I am so willing to run errands for her for past two weeks.
11 Second Club
Joined: Nov 2001
Posts: 1,320
Likes: 0
From: NE PA
Originally Posted by AOC
Hey Steve, hope everything is going well for you and your family.
My wife is wondering why I am so willing to run errands for her for past two weeks.
My wife is wondering why I am so willing to run errands for her for past two weeks.
I was the same way when I first got my 'Vette.
"Are you sure you don't need anything from the store?"
Thread Starter
TECH Regular
Joined: Nov 2001
Posts: 402
Likes: 0
From: STL
Originally Posted by XTrooper
Well, Judy's dad was diagnosed earlier this year with cancer and, unfortunately, he passed away just over two weeks ago now, but at least his suffering is over.
I was trying to install Vararam this Saturday but I couldn't even disconnect IAT connector from the MAF. It is much different than the LS1 F-Body. I screwed around for about an hour and am pretty embarassed about unable to unplug MAF connector.
Trending Topics
11 Second Club
Joined: Nov 2001
Posts: 1,320
Likes: 0
From: NE PA
Originally Posted by AOC
Sorry to hear about your loss Steve, but as stated, he isn't suffering anymore.
I was trying to install Vararam this Saturday but I couldn't even disconnect IAT connector from the MAF. It is much different than the LS1 F-Body. I screwed around for about an hour and am pretty embarassed about unable to unplug MAF connector.
I was trying to install Vararam this Saturday but I couldn't even disconnect IAT connector from the MAF. It is much different than the LS1 F-Body. I screwed around for about an hour and am pretty embarassed about unable to unplug MAF connector.
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Gas Monkey Built a 6-Wheel Ferrari Testarossa With a Corvette LT4 Engine
Verdad Gallardo
7 Most Reliable High-Performance Engines GM Has Ever Built
Verdad Gallardo
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin
Verdad Gallardo
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
