Corvette Performance
C5 | Z06 | C6 | ZR1 | C7

Who's made their own C5 Subwoofer enclosure?

Thread Tools
 
Search this Thread
 
Old 03-02-2002, 04:55 PM
  #1  
jmX
TECH Junkie
Thread Starter
 
jmX's Avatar
 
Join Date: Nov 2001
Location: Los Angeles
Posts: 3,604
Likes: 0
Received 0 Likes on 0 Posts
Default Who's made their own C5 Subwoofer enclosure?

I'm not so sure this topic belongs here, but a lot of corvette guys only check this forum on this board so I'm posting it here. <img src="gr_images/icons/wink.gif" border="0">

I went out last night and bought a jug of resin and hardner, a few rolls of fiberglass, some fiberglass mat, loads of rubber gloves and paint brushes, and some plastic sheet to guard everything with. I think I'm about ready to try my hand at fiberglassing a "stealthbox" for the C5. I know its been done before.

Have any of you C5 guys on here done this? How'd you get the wood top to seal to the fiberglass bottom?

JL dealers want $599.99 for theirs. The supplys cost me $45.62 so we'll see how it turns out. Tips would be appreciated. I'll be updating this thread with photos of how things are going (unless it turns out really bad <img src="gr_images/icons/wink.gif" border="0"> )
Old 03-03-2002, 12:49 AM
  #2  
On The Tree
 
JohnL's Avatar
 
Join Date: Dec 2001
Location: East Bay CA.
Posts: 158
Likes: 0
Received 0 Likes on 0 Posts
Default Re: Who's made their own C5 Subwoofer enclosure?

You'r going to have to explain a "stealth box". I have some fiberglass layup experience, but I don't know what the end result is going to be.
John



Quick Reply: Who's made their own C5 Subwoofer enclosure?



All times are GMT -5. The time now is 05:18 PM.