Your best 1/4 ?
Thread Starter
Teching In
Joined: Apr 2002
Posts: 5
Likes: 0
From: vegas
Your best 1/4 ? Would like to know anybody's best 1/4 et on a c-5: bone stock ? How about with bolt on's ? With performance module/chip ? How about stock tires verse drag radials or slicks ? what do you run your stock tires at (p.s.i.) Manual or auto ?
thanks in advance
thanks in advance
Staging Lane
Joined: Jan 2002
Posts: 53
Likes: 0
From: Macomb, Michigan
Re: Your best 1/4 ? 1998 Corvette coupe auto
Best 1/4 mile: 13.23 @ 106.9
60 ft. 1.98
Mods: 3:15 performance gear from factory
Corsa cat back exhaust
Stock F1 tires
All else stock
Recent mods: Donaldson Blackwing
removed mass air screen
TB Bypass
Dwayne <img border="0" alt="[Burnout]" title="" src="graemlins/burnout.gif" />
Best 1/4 mile: 13.23 @ 106.9
60 ft. 1.98
Mods: 3:15 performance gear from factory
Corsa cat back exhaust
Stock F1 tires
All else stock
Recent mods: Donaldson Blackwing
removed mass air screen
TB Bypass
Dwayne <img border="0" alt="[Burnout]" title="" src="graemlins/burnout.gif" />
Launching!
Joined: Nov 2001
Posts: 209
Likes: 0
From: Plano, TX
Re: Your best 1/4 ? 2001 Z06
Vortex box/filter, !MAF screen, Halltech Cobra, ported TB, TPIS headers, !cats, Magnaflow Xpipe, stock Ti mufflers
2.22 60'
12.56
117.57
85% humidity
82 degrees
stock tires, 32 psi.
<img border="0" alt="[Z06 Corvette]" title="" src="graemlins/z06.gif" />
Vortex box/filter, !MAF screen, Halltech Cobra, ported TB, TPIS headers, !cats, Magnaflow Xpipe, stock Ti mufflers
2.22 60'
12.56
117.57
85% humidity
82 degrees
stock tires, 32 psi.
<img border="0" alt="[Z06 Corvette]" title="" src="graemlins/z06.gif" />
Banned
Joined: Feb 2002
Posts: 301
Likes: 0
From: NJ
Re: Your best 1/4 ? 12.97 @109.76 w/ a 2.12 60ft. Completely bone stock, down to the paper filter. The clutch was slipping. It has at least two tenths left in it. It's a 99 Corvette FRC MN6. I think I'll get a 12.6x out of it.
<small>[ May 01, 2002, 11:34 AM: Message edited by: Wide Open Throttle ]</small>
<small>[ May 01, 2002, 11:34 AM: Message edited by: Wide Open Throttle ]</small>
Re: Your best 1/4 ? 12.67@111
60' = 1.957
(this was N/A)
I will have a new best on Friday when I spray <img border="0" title="" alt="[Smile]" src="gr_stretch.gif" />
<small>[ May 01, 2002, 01:51 PM: Message edited by: NastyC5 ]</small>
60' = 1.957
(this was N/A)
I will have a new best on Friday when I spray <img border="0" title="" alt="[Smile]" src="gr_stretch.gif" />
<small>[ May 01, 2002, 01:51 PM: Message edited by: NastyC5 ]</small>
Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Topdon ONE vs. Artidiag 800 BT2: Which is the Diagnostic Tablet For You?
Pouria Savadkouei
Gas Monkey Built a 6-Wheel Ferrari Testarossa With a Corvette LT4 Engine
Verdad Gallardo
7 Most Reliable High-Performance Engines GM Has Ever Built
Verdad Gallardo
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin
Verdad Gallardo
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Teching In
Joined: Mar 2004
Posts: 4
Likes: 0
Stock time I got a 2000 6speed convetable, I ran a 13.22 @ 108.34 Bone stock.. This summer I will be adding a exhaust, programmer, Vararam intake, Mass air sensor, and throttle body.. Hopefully I can get around 12.7 or so...
Teching In
Joined: Mar 2004
Posts: 5
Likes: 0
got an 02 coupe 6m Best bone stock 12.87 @ 111.98 with a 1.97 60 ft with rear tires a 28psi front @ 40psi
With drag radials on a very, very, slippery track and the air lid off with a k&n ziptied in 12.64 @ 112 with 1.92 60 ft. drag radials were at 15psi front @ 40 psi.
With drag radials on a very, very, slippery track and the air lid off with a k&n ziptied in 12.64 @ 112 with 1.92 60 ft. drag radials were at 15psi front @ 40 psi.
But add Dr's and and I will be 
. 
