Engine Removal on Vette?
Thread Starter
LS1Tech Premium Sponsor
iTrader: (4)
Joined: Nov 2001
Posts: 4,229
Likes: 4
From: Texas!
Engine Removal on Vette? Anyone ever remove their vette's ls1? Can it sit without a motor & still be mobile so we can push it into the shop until the motor gets back from the machine shop? Any tips or tricks <img border="0" title="" alt="[Smile]" src="gr_stretch.gif" />
__________________
Jason
Co-Owner, Texas Speed & Performance, Ltd.
2005 Twin Turbo C6
404cid Stroker, 67mm Twins
994rwhp/902lb ft @ 22 psi (mustang dyno) www.Texas-Speed.com
Jason
Co-Owner, Texas Speed & Performance, Ltd.
2005 Twin Turbo C6
404cid Stroker, 67mm Twins
994rwhp/902lb ft @ 22 psi (mustang dyno) www.Texas-Speed.com
Re: Engine Removal on Vette? Yes it can. Kent Moore has a set of brackets that attach to the heads to pull the motor from the top <img border="0" title="" alt="[Big Grin]" src="gr_grin.gif" /> <img border="0" alt="[cheers]" title="" src="graemlins/gr_cheers.gif" />
Launching!
Joined: Nov 2001
Posts: 247
Likes: 0
From: Chicago
Re: Engine Removal on Vette? I plan on pulling mine out from the top. I plan on taking th eheads off and then attaching the cherry picker to the head bolt holes .... a few jack stands to hold up the torque tubes and such...... should be fun ahahha
Thread Starter
LS1Tech Premium Sponsor
iTrader: (4)
Joined: Nov 2001
Posts: 4,229
Likes: 4
From: Texas!
Re: Engine Removal on Vette? Joseph is building me a stock ci motor for it, its going to get forged pistons <img border="0" title="" alt="[Smile]" src="gr_stretch.gif" />
Jason
Jason
__________________
Jason
Co-Owner, Texas Speed & Performance, Ltd.
2005 Twin Turbo C6
404cid Stroker, 67mm Twins
994rwhp/902lb ft @ 22 psi (mustang dyno) www.Texas-Speed.com
Jason
Co-Owner, Texas Speed & Performance, Ltd.
2005 Twin Turbo C6
404cid Stroker, 67mm Twins
994rwhp/902lb ft @ 22 psi (mustang dyno) www.Texas-Speed.com
