High powered vettes inside
Thread Starter
TECH Resident
iTrader: (94)
Joined: May 2003
Posts: 990
Likes: 0
From: port st lucie florida
High powered vettes inside I have gotten everything you can for the rear and trans for my car but was wondering if the is a trasn mount that I could get instead of the one from Breathless performance. They want 200 for just a mount. Does anyone else make one? Is it even needed for 1000 rwhp ?
Originally Posted by GTFORMULA
Guys I already bought a DTE brace. I need to know if there is a "mount" for the differential to subframe. Thanks.
i understand. DTE makes the brace, you don't want that. you want the TRANSMISSON MOUNT...like motor mount. The factory replacment part, that you don't want factory, you want a Zinc coated metal piece. I know.
vette brakes and products, sells this.
Thread Starter
TECH Resident
iTrader: (94)
Joined: May 2003
Posts: 990
Likes: 0
From: port st lucie florida
Thanks for clearing it up. Do you think a solid piece is a good idea ? Or should there be some flex. I remember on old school **** that if it twisted it a solid mount may snap the driveline ,but if you used poly mounts it wouldnt do that. Do you know anybody that has one in their car? Thanks for the input.
Trending Topics
I also wanted to buy a poly rear end mount but dont know where to look, if you find one shoot up a link........ btw, if your going to be over 1khp dont expect the car to be bullet proof for many years and all types of abuse, thats an insane number for a C5, and if I'm ever down that way I'd love to go for a ride 
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo Thread Starter
TECH Resident
iTrader: (94)
Joined: May 2003
Posts: 990
Likes: 0
From: port st lucie florida
I know it will be a matter of time before something blows at that level but thats the price of doing business I guess. I just got the motor in the car and about 20 miles on it. The kit is sitting here ready to start getting put on I just wanted to break in the engine with no boost for awhile. I know myself if I had the boost Id use it like an idiot before its broke in. I ordered the Hptuner for it so I can get a base tune in it. It right now wont idle and surges pretty bad at low rpm. I have a long way to go before its done. Heres just a small list off the top of my head- cage,parashut,fuel system,turbo install,fab cold side,guages,all drive line parts installed,wheels,dyno tuning,injectors,relocate some stuff. Im sure theres more.
I just had a thought .When I get the trans and diff out Im going to take the mount and get some dimensions on it and call energy suspension and maybe they will have something close that I could get to work.
I just had a thought .When I get the trans and diff out Im going to take the mount and get some dimensions on it and call energy suspension and maybe they will have something close that I could get to work.
Thread Starter
TECH Resident
iTrader: (94)
Joined: May 2003
Posts: 990
Likes: 0
From: port st lucie florida
Well not as expensive as Breathless performance. The mount if I remember right was 129 and motor mounts were 159?? If you look on their website you will be able to find them ok. I was only lookin for the trans mount then I saw rthe motor mounts and figured I would probably rip the stock ones to pieces on the first launch. Another note when I had the motor out of my car and the drivetrain still in ,you could literally move the drivetrain around if there was hardly anything holding it in. Thats why I was really lookin for a good mount.
Thread Starter
TECH Resident
iTrader: (94)
Joined: May 2003
Posts: 990
Likes: 0
From: port st lucie florida
I got the mounts today and I have to say they are very nice looking and well made.
heres the link if anyone needs it.www.vbandp.com
heres the link if anyone needs it.www.vbandp.com
