DTE Current Differential Model Coverage
Thread Starter
Staging Lane
Joined: Dec 2004
Posts: 97
Likes: 0
DTE Current Differential Model Coverage We’ve had quite a lot of emails and phone calls lately from customers, dealers and tuners alike, inquiring on what new differential models we are currently building and which we are not. The models not being covered yet are only at a temporary hold and will commence once aftermarket gear sets are available and ready for release. We’re not certain when that will be, but we will let everyone know when we know for certain. We do however, have every other HD internal differential component completed and in production for any model year from 1997-2006.
Models Currently Covered:
1997-2004 C5 Corvette equipped with LS1/LS6 using M6, M12 and A4 transmissions
2 or 3-series cases
2.73, 3.15, 3.42, 3.73, 3.90 and 4.10 ratios available
2005 C6 Corvette equipped with LS2 using M6, M12 and A4 transmissions
2 or 3-series cases
2.73, 3.15, 3.42, 3.73, 3.90 and 4.10 ratios available
2006 C6 Corvette equipped with LS2 using M6 and M12 transmissions
2 or 3-series cases
2.73, 3.15, 3.42, 3.73, 3.90 and 4.10 ratios available
No gear sets available as of yet for the 2006 C6Z or the 2006 C6/LS2 A6 models. The MG 3.42, 3.73 and 3.90 gear ratios are on backorder from MG until Mid-September and if we get them in sooner than that, we'll let everyone know. We hope this clarifies things a bit for some folks.
Best Regards,
DTE
Models Currently Covered:
1997-2004 C5 Corvette equipped with LS1/LS6 using M6, M12 and A4 transmissions
2 or 3-series cases
2.73, 3.15, 3.42, 3.73, 3.90 and 4.10 ratios available
2005 C6 Corvette equipped with LS2 using M6, M12 and A4 transmissions
2 or 3-series cases
2.73, 3.15, 3.42, 3.73, 3.90 and 4.10 ratios available
2006 C6 Corvette equipped with LS2 using M6 and M12 transmissions
2 or 3-series cases
2.73, 3.15, 3.42, 3.73, 3.90 and 4.10 ratios available
No gear sets available as of yet for the 2006 C6Z or the 2006 C6/LS2 A6 models. The MG 3.42, 3.73 and 3.90 gear ratios are on backorder from MG until Mid-September and if we get them in sooner than that, we'll let everyone know. We hope this clarifies things a bit for some folks.
Best Regards,
DTE
Last edited by Dynotech Engineering; Aug 4, 2006 at 11:05 AM.
TECH Senior Member
iTrader: (3)
Joined: Apr 2006
Posts: 6,524
Likes: 1
From: Western Burbs of Detroit
Keep up the good work. I am really happy with my Stg III (3.42) Thank you for the quality products. That brace is worth every penny, if you got lots of power, the brace is definately a must have.
