Replacing Driver Side Headlamp
10-15-2006, 12:50 PM
#2
11 Second Club
Join Date: Jun 2005
Location: Was New Orleans, but swam to Baton Rouge
Posts: 1,537
Likes: 0
Received 0 Likes
on
0 Posts
What are trying to replace it for? I do not know if there are instructions anywhere, but I can give you a good idea of what needs to be done.
First you can start off by using the manual crank on the headlight to raise it up. Then remove the 3 screws on the plastic cover that goes around the sides of the head light. Once that is off you can work your hand down into the headlight bezel. There are 3 10mm nuts that attach the back of the headlight to the fender. Finally you have 3 13mm bolts that attach the headlight to the frame right by the radiator. After that just carefully work the headlight out so as to not damage any paint on the car.
First you can start off by using the manual crank on the headlight to raise it up. Then remove the 3 screws on the plastic cover that goes around the sides of the head light. Once that is off you can work your hand down into the headlight bezel. There are 3 10mm nuts that attach the back of the headlight to the fender. Finally you have 3 13mm bolts that attach the headlight to the frame right by the radiator. After that just carefully work the headlight out so as to not damage any paint on the car.
