very nice price! Any idea whether you'll have a similar deal for C6's? 
Stainless Headers and X-pipe NEW TECH SPONSOR
You guys keep replying in a harassment type manner, and I'll keep using the ban button. Seller harassment or comments made to negatively affect a sale are not permitted on this site. You have been warned, and you guys keep replying?
If you do not like the price, DO NOT BUY THEM! No reply needed.
If you do not like the price, DO NOT BUY THEM! No reply needed.
Originally Posted by black2002ws6
Ok I talked with the company making this setup and I guess they were offering me a higher price on the setup. They dropped my cost quite a bit so I can now offer the package for $600 shipped to you door. Or if you just want the headers there $450 shipped and if you just want the X-pipe it's $225 shipped.
Killer deal, I'll be picking some up shortly. Did you ever find the dyno graph?
TECH Senior Member
iTrader: (3)
Joined: Apr 2006
Posts: 6,524
Likes: 1
From: Western Burbs of Detroit
Glad to see the price came down a bit. You will probably have an easier time selling your headers now. Good luck, and don't let a few ******** on here ruin it for the rest of us. Again good luck, and get that graph up when you can.
well since my post on here was deleted I will ask this question again. Is there any fitment issues with these headers? Also would I need to get 02 sensor extensions for the front o2's? Thanks
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Gas Monkey Built a 6-Wheel Ferrari Testarossa With a Corvette LT4 Engine
Verdad Gallardo
7 Most Reliable High-Performance Engines GM Has Ever Built
Verdad Gallardo
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin
Verdad Gallardo
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo To be totally honest I have not installed a set of these myself but from what I have been told the first one's they were making did have some problems so they changed their design and since then there has been no problems. As fas as the 02 extensions I'm not sure since I have not installed a set myself.
So the full price is 600 for the headers and x-pipe. And they will fit my 02 C5 with no problem. Also all of the smog connection are on the headers correct? If all is true Iam very interested!
Last edited by fastorgbird; May 15, 2007 at 10:30 PM.
Teching In
Joined: Oct 2005
Posts: 5
Likes: 0
Im very interested in a set of these headers, im picking up a C5 soon, but a few questions, what size are the primary tubes, whats the diameter of the collector outlet, and what is the diameter of the piping on the X-pipe section?
Thank you
Thank you
Registered User
Joined: May 2007
Posts: 3
Likes: 0
Frankly, it's expensive. Not a good deal for me. But after all, it's Vette we're talking about in here. So there's no use to ask for a lesser bargain, right?
________________________
Donald
Mid America Motorworks - Original engine in Chevrolet Corvette Parts and Accessories by Mid America Motorworks
________________________
Donald
Mid America Motorworks - Original engine in Chevrolet Corvette Parts and Accessories by Mid America Motorworks
Teching In
Joined: Jun 2007
Posts: 4
Likes: 0
From: DuBois, PA
Hey guys,
I've been working w/SSAC for sometime on these for the Vettes now. Here's some install pics and a list of parts I used to install mine;
Parts;
Ebay Headers and X-Pipe with gaskets
Exhaust manifold gaskets G.M. PN 12558573(old) New is 12600530
AIR tube gaskets
3" high flow cats’ 3" Thunderbolt cats from Performance-Curve.com. They're $36.95 each for ceramic cores, $60 for metal cores.
6 x 3" stepped band clamps Summit P/N WLK-33272
2 x 2.5" stepped band clamps Summit P/N WLK-33226
2 x 3"-2.5" cone reducers Summit P/N FLO-R3025
2 x 10” (approximate) 3” Pipe
Optional – Ball and Socket Flange Summit P/N FLO-15925
Any other questions, please EMail me @ tstarsvette@yahoo.com
I've been working w/SSAC for sometime on these for the Vettes now. Here's some install pics and a list of parts I used to install mine;
Parts;
Ebay Headers and X-Pipe with gaskets
Exhaust manifold gaskets G.M. PN 12558573(old) New is 12600530
AIR tube gaskets
3" high flow cats’ 3" Thunderbolt cats from Performance-Curve.com. They're $36.95 each for ceramic cores, $60 for metal cores.
6 x 3" stepped band clamps Summit P/N WLK-33272
2 x 2.5" stepped band clamps Summit P/N WLK-33226
2 x 3"-2.5" cone reducers Summit P/N FLO-R3025
2 x 10” (approximate) 3” Pipe
Optional – Ball and Socket Flange Summit P/N FLO-15925
Any other questions, please EMail me @ tstarsvette@yahoo.com
Teching In
Joined: Jun 2007
Posts: 4
Likes: 0
From: DuBois, PA
Originally Posted by black2002ws6
1 3/4" primaries 3" collectors and 3" X-pipe
They are working on a Cat Back now and hopefully C6 versions should begin in a few months...
As you can see in my previois post the AIR tubes ARE NOT INSTALLED, you must install or have them installed! Which is actually a pretty good idea...
These are made from SUS 321 Stainless, far better material then the standard 302 you see on most systems...
I think that about covers all the items I saw in here...
