Corvette Performance
C5 | Z06 | C6 | ZR1 | C7

New BEST with the Vette 11.4@125mph WOOT!

Thread Tools
 
Search this Thread
 
Old 06-17-2007, 08:50 AM
  #1  
TECH Fanatic
Thread Starter
iTrader: (12)
 
Zturd's Avatar
 
Join Date: Jan 2002
Location: York, PA
Posts: 1,249
Likes: 0
Received 0 Likes on 0 Posts

Default New BEST with the Vette 11.4@125mph WOOT!

Well I went to Cecil today 6/16 for the Vette day at cecil. The track didnt stay prepped to well due to everyone running street tires. Kept taking the rubber and VHT away So I had the car out to see how it would do on the ET streets 11.5/16s and skinnies in the front. Previous best was 12.3@124.01 with a horrible 60ft and leaving on and off 3 times due to wheel hop on street tires with heavy Z06 rims/tires. Runs are as follows:

1st pass(immediately after 1.5hr drive)
60ft-1.882
330ft-5.142
1/8th-7.808
1/8th-96.85mph
1000ft-9.958
1/4mi-11.796
1/4mi-124.13

2nd pass
60ft-1.925
330ft-5.120
1/8th-7.684
1/8th-97.48mph
1000ft-9.889
1/4mi-11.706
1/4mi-125.23

3rd pass
60ft-1.698
330ft-4.873-(smacked the rev limiter hard in 1st and 2nd a tad due to car was swerving hard)
1/8th-7.526
1/8th-95.49mph
1000ft-9.761
1/4mi-11.601
1/4mi-124.02

Best pass out of a couple others was this run:
60ft-1.728
330ft-4.857
1/8th-7.420
1/8th-95.45mph
1000ft-9.619
1/4mi-11.438
1/4mi-125.15

I was trying to take it easy on the car due to I didnt get the DTE trans brace on yet and I have to drop it off at the bodyshop again monday plus i didnt shift to hard on her just to make sure everything stayed together for the 1.5hr drive back. I dont like bench race but i got so exited thinking about it when it gets colder out and launch the car hard I feel confident in a very low 11sec pass if not.....???HMMMM maybe????
__________________
Old 06-17-2007, 08:52 AM
  #2  
TECH Fanatic
Thread Starter
iTrader: (12)
 
Zturd's Avatar
 
Join Date: Jan 2002
Location: York, PA
Posts: 1,249
Likes: 0
Received 0 Likes on 0 Posts

Default

These helped greatly and made me grin ear to ear!!!!!!

[IMG][/IMG]
Old 06-17-2007, 09:15 AM
  #3  
Launching!
iTrader: (1)
 
BigRon77's Avatar
 
Join Date: Jun 2006
Location: Plano/Dallas TX
Posts: 292
Likes: 0
Received 0 Likes on 0 Posts
Default

Great #'s! You should be able to rip a 10 out of it if the stars align just right (and all the pieces stay together). Definitely got some 11.0-11.1s in it if you take hammer it a little harder.
Old 06-17-2007, 12:53 PM
  #4  
TECH Senior Member
iTrader: (3)
 
allngn_c5's Avatar
 
Join Date: Apr 2006
Location: Western Burbs of Detroit
Posts: 6,524
Likes: 0
Received 1 Like on 1 Post
Default

M/T's ET street radials, I just ordered a set of them. 305 35r 18's. I hope they improve my 60 ft times as much as yours. Good runs.
Old 06-19-2007, 10:01 PM
  #5  
TECH Regular
iTrader: (1)
 
Mike00FRC's Avatar
 
Join Date: Jun 2002
Location: Pottstown, PA
Posts: 464
Likes: 0
Received 0 Likes on 0 Posts

Default

Nice runs

Any problem stopping that thing with those small-*** roters in front?



Quick Reply: New BEST with the Vette 11.4@125mph WOOT!



All times are GMT -5. The time now is 11:45 PM.