BSMDan

Need help. Working on a customers project car which he did on his own but now is running into problems. In his project he used a C5 LS1 with the harness and pcm. Then he wanted to change to the cable throttle body. So he replaced the harness and pcm and is now using an f-body harness and pcm. Unknown what happened to the original harness and pcm. Now he wants to switch back to the original ETC. Can we still use the f-body harness and pcm or do we have to buy a corvette harness and pcm? Can we keep the f-body harness, use a corvette pcm and add a wire for the ETC? If so, does anyone know the pin# on the corvette pcm?

Reason for asking is that we dont really want to purchase a helms vette manual due to the fact that most of our customers or f-body and mustang customers. We tried dealers but no luck and here in Hawaii, we havent found anyone who specializes in corvette pcms.

Can anyone help?


Thanks,

Dan

kp

iTrader: (34)

The ETC is controlled by a seperate module on a C5 that is connected to the pcm through serial communication. In other words, it wont work with the f-body PCM

BSMDan

Okay, thanks alot. I'll let my customer know. More bucks.

Dan