ECS Z06 780 rwhp
Trending Topics
12-31-2007, 08:49 AM
#8
Teching In
Thread Starter
Join Date: Dec 2005
Location: Louisiana / Maryland
Posts: 14
Likes: 0
Received 0 Likes
on
0 Posts
, no its the stock rear caliper on a baer eradispeed +2 rotor. I wanted the C6 Z06 rear caliper, but I have a 3.5 in lip on my 20 inch rear wheels. I plan on painting the whole caliper this Winter to make it look a little bigger.Thanks
12-31-2007, 08:51 AM
#9
Teching In
Thread Starter
Join Date: Dec 2005
Location: Louisiana / Maryland
Posts: 14
Likes: 0
Received 0 Likes
on
0 Posts
Im sure a couple tweaks and I could hit 780. 
01-01-2008, 11:00 AM
#16
Teching In
Thread Starter
Join Date: Dec 2005
Location: Louisiana / Maryland
Posts: 14
Likes: 0
Received 0 Likes
on
0 Posts
ECS can do wonders with there setup.
Boost is 14-15#
There forged motor uses Manley Rods/Pistons, ARP bolts etc. polished/balanced crank
Heads are ported LS6 Heads, using Manley Stainless valves, Comp 921 dual springs. Manley pushrods.
ECS Blower Cam
ECS 8 Rib Setup
ECS Bracket (new setup)
ECS Fuel System
ECS Dual Nozzle Meth Kit
01-01-2008, 03:16 PM
#18
Teching In
Thread Starter
Join Date: Dec 2005
Location: Louisiana / Maryland
Posts: 14
Likes: 0
Received 0 Likes
on
0 Posts
Traction is ok, but if you really want it to hook up from a dead, dont get the 20's
I love the 19/20 way too much to give it up, so my traction suffers.
From a roll however it does real good, but I have broke the tires loose over 110+ mph in a shift
I love the 19/20 way too much to give it up, so my traction suffers.
From a roll however it does real good, but I have broke the tires loose over 110+ mph in a shift
