Hey Guys....
Thread Starter
FormerVendor
Joined: Oct 2006
Posts: 3,123
Likes: 3
From: D-F/W
Hey Guys.... I thought I would come over to the Corvette Forum and formally introduce myself to you. No doubt you've seen me posting here and there but I don't get in here much.
I'm Gilbert. I own and Operate ACE Racing Transmissions just outside of Fort Worth. We are a full service shop. We have an established relationship with Joshua at Resurrection Motorsports in Arlington. I mention him because he deals strictly in Corvettes, some of you may know him. He's running our unit in his C5 and has a few in his customers cars as well.
If any of you have any questions regarding your transmissions feel free to look me up. We build A4's and M6's as well.
If you haven't seen our latest Sale thread take a look at it here... https://ls1tech.com/forums/sponsor-sales-specials/950332-ace-racing-transmissions-summer-sale.html There is allot of information about us in that thread.
Here's a link to our most recent satisfied Corvette customer... https://ls1tech.com/forums/ls1tech-sponsor-feedback/951753-i-can-t-believe-i-forgot-ace-racing-transmissions.html
Carlos had a FLP Stage 3 (Built by Chuck of FLT when he was with FLP) unit in his car that was about 5 years old. It had been gone through once before, but that builder did not know to update the 3/4 clutch assy. FLP was using a different stack at the time that was state of the art back then. It has since been replaced by an updated setup that includes heavier duty reaction plates and other hardware elsewhere in the unit. We were able to take his unit to a higher level than was previously possible!
Don't settle for less when you are considering an upgraded Transmission.
Give me a call anytime you have any questions or concerns about your transmission or even the transmission tuning. I'll try to hang out in here more often. No doubt you can usually find me in the Automatics Forum here at Tech., or just shoot me a p.m.
g
I'm Gilbert. I own and Operate ACE Racing Transmissions just outside of Fort Worth. We are a full service shop. We have an established relationship with Joshua at Resurrection Motorsports in Arlington. I mention him because he deals strictly in Corvettes, some of you may know him. He's running our unit in his C5 and has a few in his customers cars as well.
If any of you have any questions regarding your transmissions feel free to look me up. We build A4's and M6's as well.
If you haven't seen our latest Sale thread take a look at it here... https://ls1tech.com/forums/sponsor-sales-specials/950332-ace-racing-transmissions-summer-sale.html There is allot of information about us in that thread.
Here's a link to our most recent satisfied Corvette customer... https://ls1tech.com/forums/ls1tech-sponsor-feedback/951753-i-can-t-believe-i-forgot-ace-racing-transmissions.html
Carlos had a FLP Stage 3 (Built by Chuck of FLT when he was with FLP) unit in his car that was about 5 years old. It had been gone through once before, but that builder did not know to update the 3/4 clutch assy. FLP was using a different stack at the time that was state of the art back then. It has since been replaced by an updated setup that includes heavier duty reaction plates and other hardware elsewhere in the unit. We were able to take his unit to a higher level than was previously possible!
Don't settle for less when you are considering an upgraded Transmission.
Give me a call anytime you have any questions or concerns about your transmission or even the transmission tuning. I'll try to hang out in here more often. No doubt you can usually find me in the Automatics Forum here at Tech., or just shoot me a p.m.
g
