dynoed today
Thread Starter
Staging Lane
Joined: Jun 2007
Posts: 50
Likes: 1
From: eastern nc
dynoed today Finally have all the issues fixed associated with my LG Pro header install. Went to the dyno for a tune today. My car is 03 Z06 with Breathless Performance intake, LG Pros with x pipe and cats, and Corsa Indys. Came away with 380/370. Tuned by Ryan at RPM in Garner NC. We looked at three different graphs of 03 Z's he had tuned in the past and all were similarly equipped and all were within 5 hp of each other. I was pleased with the numbers and highly recommend Ryan if you need work done. They are good people. 
Interesting. Very close to my #'s with ssac headers xpipe stock z06 cat back and custom intake. 381/367 we will see what the car will do after cam and supercharger are in. congrats
Thread Starter
Staging Lane
Joined: Jun 2007
Posts: 50
Likes: 1
From: eastern nc
Yes very familar with your club. We (Eastern Carolina Corvette Club) attend your show every year and you guys come to ours . We are in Wilson. Be careful over there and thank you for your service to our country.
Thread Starter
Staging Lane
Joined: Jun 2007
Posts: 50
Likes: 1
From: eastern nc
Thanks. I bet you will be looking for new rear tires soon. I am thinking about going back to my Ti cat back. The Indys are Nascar loud when you put your foot down but they sure do sound good just cruising around. Do you have cats on your car?
NO cats I have since added B&B PRT exhaust. The supercharger and cam install should be done wed and we will see what she sounds like then. I have CCW 19's with BFG KDW2 they hook well so far but not with close to 575 rwhp.
Thread Starter
Staging Lane
Joined: Jun 2007
Posts: 50
Likes: 1
From: eastern nc
Good luck and post up your results when you get done. Later.
Trending Topics
Hmm, do the #'s sound low or is it just me? Our 02 Z with just intake and exhaust dyno'd at 371/360. With headers and a tune I would expect it to be in the 390 range. Im not trying to be a smartass, just wondering.
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Topdon ONE vs. Artidiag 800 BT2: Which is the Diagnostic Tablet For You?
Pouria Savadkouei
Gas Monkey Built a 6-Wheel Ferrari Testarossa With a Corvette LT4 Engine
Verdad Gallardo
7 Most Reliable High-Performance Engines GM Has Ever Built
Verdad Gallardo
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin
Verdad Gallardo
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Quik Z06: Hmm, do the #'s sound low or is it just me? Our 02 Z with just intake and exhaust dyno'd at 371/360. With headers and a tune I would expect it to be in the 390 range. Im not trying to be a smartass, just wondering.
I agree with you.... I have a almost stock 03 Z06 (only thing is a blackwing air system).... i dynoed at 368/359, i would have expected more in the 390 range also....
But who cares, nice numbers and car!!!!
Rick
I agree with you.... I have a almost stock 03 Z06 (only thing is a blackwing air system).... i dynoed at 368/359, i would have expected more in the 390 range also....
But who cares, nice numbers and car!!!!
Rick
Thread Starter
Staging Lane
Joined: Jun 2007
Posts: 50
Likes: 1
From: eastern nc
Could just be the dyno but 3 Z's with long tubes and similar mods all were within 5 hp so I wouldn't think all three would be low. Also this is a 14k mile car so maybe will loosen up some with more miles. These numbers were also corrected for conditions. 87 degress 47 % humidity. To be honest this is about the number I expected to see.
Teching In
Joined: Apr 2008
Posts: 14
Likes: 0
From: Jacksonville, Florida
Good numbers.
I do not think it is all that low.
My car 2003 Z06 with Halltech CAI & LG Street headers/X pipe untunned put down 383 rwhp & 370 rwtq.
I think the weather conditions & the dyno can make a difference..
Take it to the track, that is where it matters.
I do not think it is all that low.
My car 2003 Z06 with Halltech CAI & LG Street headers/X pipe untunned put down 383 rwhp & 370 rwtq.
I think the weather conditions & the dyno can make a difference..
Take it to the track, that is where it matters.
Thread Starter
Staging Lane
Joined: Jun 2007
Posts: 50
Likes: 1
From: eastern nc
11 Second Club
Joined: Dec 2007
Posts: 71
Likes: 0
From: north Carolina
I have the LG Longtube headers, KN Intake, stock exhaust, Cam and Dynotune and I came in at 427rwhp. Ryan at RPM did my setup on everything too. Awesome shop. Your on HPJ?
Edit: My car with intake, headers, and tune came in at 390rwhp. Just FYI for the Quik Z06. I did all of that before I decided to get the cam.
Edit: My car with intake, headers, and tune came in at 390rwhp. Just FYI for the Quik Z06. I did all of that before I decided to get the cam.
Thread Starter
Staging Lane
Joined: Jun 2007
Posts: 50
Likes: 1
From: eastern nc
I have the LG Longtube headers, KN Intake, stock exhaust, Cam and Dynotune and I came in at 427rwhp. Ryan at RPM did my setup on everything too. Awesome shop. Your on HPJ?
Edit: My car with intake, headers, and tune came in at 390rwhp. Just FYI for the Quik Z06. I did all of that before I decided to get the cam.
Edit: My car with intake, headers, and tune came in at 390rwhp. Just FYI for the Quik Z06. I did all of that before I decided to get the cam.
