Corvette On Trailer - Clearance Problems?
My wife and I moving back to Tampa within the next few months, and we're going to have to trailer the C5. The trailer will be from either Uhaul or Budget.
My question is, since it's stock height with the stock wheels, will I have a clearance problem getting it onto the trailer? The worst thing in the world would be to bottom-out and scratch the hell out of the fascia.
Thanks in advance,
Vince
My wife and I moving back to Tampa within the next few months, and we're going to have to trailer the C5. The trailer will be from either Uhaul or Budget.
My question is, since it's stock height with the stock wheels, will I have a clearance problem getting it onto the trailer? The worst thing in the world would be to bottom-out and scratch the hell out of the fascia.
Thanks in advance,
Vince
Pitt
Pitt
Yeah, pictures would be great. I'm definitely a visual learner. LOL
I believe the car trailers that UHaul and Budget offer have flip-down fenders so that lower cars can still open their doors. I'm not a 100% sure though.
Pitt
1) ramps are too steep. Easily fixed by backing up to a hill to straighten out the ramps
2) you will not be able to pull all the way forward because there's a metal lip at the front of the trailer that's probably 4" tall. The solution is to put some 2"x6" (about 12" worth) up there and drive up onto it so the front air dam/bumper clears this metal lip. Doesn't matter that you'll be parked on wood pieces b/c the ratcheting straps will just pull the car/wood down against the trailer anyways.
Trending Topics
No rush man. Thanks so much for the pics.
We're moving from Port St Lucie back to Tampa - hopefully before the end of September. We've been living in this stinkhole for 4 years and couldn't be happier to move back to the west coast.
The Best V8 Stories One Small Block at Time
I used you as an excuse to skip the gym, come home and take pictures while I drink Beer..lol. Here ya go...works like a champ. Just use 2-1/2" deck screws and a six pack per ramp.
http://i160.photobucket.com/albums/t...e/DSC01385.jpg
http://i160.photobucket.com/albums/t...e/DSC01388.jpg
Pitt
I really appreciate it.
Vincent
I used you as an excuse to skip the gym, come home and take pictures while I drink Beer..lol. Here ya go...works like a champ. Just use 2-1/2" deck screws and a six pack per ramp.
http://i160.photobucket.com/albums/t...e/DSC01385.jpg
http://i160.photobucket.com/albums/t...e/DSC01388.jpg
Pitt
I had to make three trips from NC to AZ pulling car trailers.
Good Luck on your move. I feel your pain
Oh dude, vero is 20 minutes from there(my old hometown). Livin down south now. I'll be crusing up in two weeks to work on a couple of speed freaks.
Pitt



