M6 to a TH400 track results
#43
Thanks again Tom, I'm gonna try to make it to Byron on Sat. I'm with Larry, you need to tell the boss you need the day off to do a little test and tune.
#48
Looks like it's working man, nice job!
I'm sure the converter is close, if it was a mile off it wouldn't be working as good as it is. Maybe bump it a little looser, or just try leaving harder, or on the brake, and you may be good to go!
I'm sure the converter is close, if it was a mile off it wouldn't be working as good as it is. Maybe bump it a little looser, or just try leaving harder, or on the brake, and you may be good to go!
#49
Thread Starter
10 Second Club
iTrader: (5)
Joined: Sep 2005
Posts: 2,141
Likes: 1
From: Homer Glen IL
^^^ thanks JL next time out TB will be used ...front has limiters and strange double adj shocks now so should be good ....i only got 2 runs in but coming off idle the result was very very promising
#51
Nice. When I was running my car n/a the best I ever got from it was a 10.54@127, but it was a portly 3550 at the time.
I'm gonna be curious to see what it does, albiet the nitrous converter and gearing change once I have it down to 2900 where it should be. Should be intresting
I'm gonna be curious to see what it does, albiet the nitrous converter and gearing change once I have it down to 2900 where it should be. Should be intresting
#54
Thread Starter
10 Second Club
iTrader: (5)
Joined: Sep 2005
Posts: 2,141
Likes: 1
From: Homer Glen IL
i have some pics of the interior in my albums.... i am planning to take another 100 lbs off the car very soon
video of both runshttp://www.youtube.com/watch?v=eHUgbVBMwH4
video of both runshttp://www.youtube.com/watch?v=eHUgbVBMwH4
Last edited by ndfrsd6; 05-22-2009 at 03:24 PM.
#55
Looking at building a bigger motor vs what I can sell the current motor for vs what it will cost me to solid roller the current motor and a couple other upgrades while I have it apart. Not sure what the best route is to take right now, but if another alum motor goes in the car it's gonna be a 2900 lb car when it's done. I have 275 lbs worth of parts sitting here right now already and haven't bought the front suspension yet!
#58
Car looks great Tom. I just watched your new vid too. I look like a BADASS watching your car pulling off the trailer. Get a hold of me later I'm still trying to decide if I should go with front shocks or a stiff walled slick.