224 Cam Results -Post your 1/4 Times
#1
On The Tree
Thread Starter
iTrader: (10)
Join Date: Jan 2007
Location: Chicago
Posts: 108
Likes: 0
Received 0 Likes
on
0 Posts
224 Cam Results -Post your 1/4 Times
Post you 1/4 mile times. 60' and mph
Stock Block,Auto 3600 Stall,Fast 90mm Intake,Patriot LS6 Heads,224/224 .581 Lift
11.7 at 115 1.65 60'
Looking for comparsions....
Stock Block,Auto 3600 Stall,Fast 90mm Intake,Patriot LS6 Heads,224/224 .581 Lift
11.7 at 115 1.65 60'
Looking for comparsions....
Last edited by OLDSCHOOL85; 11-21-2010 at 02:37 PM.
#7
TECH Fanatic
iTrader: (37)
Join Date: Nov 2001
Location: Wentzville MO
Posts: 1,601
Likes: 0
Received 0 Likes
on
0 Posts
11.88 at 118 with a 224/224 535 lift 114 lsa car weighed 3450 with a 10 bolt and 6 speed.
Cam only ,ls6 intake,stock ported t/b
Cam only ,ls6 intake,stock ported t/b
Last edited by TOSTO RACING; 12-05-2010 at 12:53 PM.
Trending Topics
#13
Teching In
Join Date: Jul 2005
Location: Southern Maryland
Posts: 37
Likes: 0
Received 0 Likes
on
0 Posts
#17
12 Second Club
Join Date: Jun 2005
Location: Sykesville
Posts: 50
Likes: 0
Received 0 Likes
on
0 Posts
With Just a 224 cam with stock rear M6 and some bolt ons, exhaust, mid length headers. 12.40s
changed to a th-400 and a 9 inch rear with 411 gears went 11.89
Put a 150 shot on it went 10.36 with mods down below
Race weight 3600lbs
changed to a th-400 and a 9 inch rear with 411 gears went 11.89
Put a 150 shot on it went 10.36 with mods down below
Race weight 3600lbs
#18
TECH Junkie
iTrader: (9)
Full weight t-roof car with AC etc. TR224 112, M6, 3.73's, hand port 853 heads ( stock 99 castings ) LS6 intake, 1 3/4 lts into 2.5 y and single 3" exh.
Ran 12.1 @ 112 with a 1.69 60'
Had a lot of trouble shifting 3-4 and typically trapped 114-117 but that was my best time slip ^
Ran 12.1 @ 112 with a 1.69 60'
Had a lot of trouble shifting 3-4 and typically trapped 114-117 but that was my best time slip ^
#20
TECH Addict
iTrader: (7)
2002 Z28 M6 - 224/228 581/588 113LSA, $900/pair LS6 heads, SLP flopac, Pacesetter headers/ORY with a single 3" cutout, 12-bolt with 4.10s, MN12 T56, some suspension mods, stock shocks/springs. 3,660 race weight. 408/380 SAE on a dynojet.
EDIT: those are stock 17" SS wheels up front and 16" ET Streets in back (some shitty generic wheels I picked up for $20).
Bests were 11.44 and 121.8 but I don't have that on video. Here's one of my runs, though.
http://www.youtube.com/watch?v=JKVCiIRMRWw
EDIT: those are stock 17" SS wheels up front and 16" ET Streets in back (some shitty generic wheels I picked up for $20).
Bests were 11.44 and 121.8 but I don't have that on video. Here's one of my runs, though.
http://www.youtube.com/watch?v=JKVCiIRMRWw