racer88

I found my best timeslip when I was bone stock aside from an air lid on drag radials.

Nov 2002

60' 1.98
330' 5.558
1/8 8.504 @ 84.10
1000 10.996
13.105 @ 106.77

Dec 2004

60' 1.813
330 5.089
1/8 7.868 @ 90.58
1000' blank
12.203 @ 115.44

Next up.............forged internals going in soon with some giggle juice along with a sticky tire and a steel driveshaft, heads..........possibly.

LS1_PNYTAMR

iTrader: (1)

my best with airlid and nitto drag 245's was 12.88 @ 107... 12.80 with cutout.. venture to say it would have gone 12.99 bone stock since the airlid and the tires didn't help at the local 1/8th.. this was in september, prolly about 60-75 degrees out.. not 40 degree or anything

racer88

Well, based on the my 60' and our local track which is anywhere from great with track prep had I cut a 1.7 60' it would have been a solid 12.8 run. That's still okay because 2 mos later at a better track I cut a 1.748 60' on Nitto's and ran some 12.6's with my headers and gears. But that was a few years ago and honestly my 60's got alot better once I went to 4.10 gears took alot off the clutch.

Just funny as I was going through my slips, I now have 2 overstuffed envelopes.

gator's 99TA

iTrader: (2)

good deal on the buildup. get her going and get a new best. move up on the FL forum's drag racing list

racer88

Yep, had to wait for them do finish Devon's motor it's done It's my turn!