what to expect after stall install?
Thread Starter
12 Second Club
iTrader: (16)
Joined: Jul 2005
Posts: 783
Likes: 0
From: central coast, cali
what to expect after stall install? i have a 98 z A4 and im about to have a 3200 stall put into my car. my mods are: SPL lid, Borla exhuast, LS6 intake, Pulleys, pro. tuned with HP tuners. what should i run in the 1/4?
Where do you race at? If it is at Famoso Raceway (Bakersfield), and with some ET Streets, you should be able to go mid 12 at 108. What converter? I used to have a Vig3200 and with similar mods I ran 12.75 @ 105 at LACR (2710').
Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Topdon ONE vs. Artidiag 800 BT2: Which is the Diagnostic Tablet For You?
Pouria Savadkouei
Gas Monkey Built a 6-Wheel Ferrari Testarossa With a Corvette LT4 Engine
Verdad Gallardo
7 Most Reliable High-Performance Engines GM Has Ever Built
Verdad Gallardo
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin
Verdad Gallardo
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
11 Second Club
Joined: Jun 2005
Posts: 481
Likes: 0
From: Syracuse In
Originally Posted by 1fastz
i have a 98 z A4 and im about to have a 3200 stall put into my car. my mods are: SPL lid, Borla exhuast, LS6 intake, Pulleys, pro. tuned with HP tuners. what should i run in the 1/4?
I run a 12.9 @104.72 With mainly just a Cutout 3500stall and DR That intake will help you out and the cat back and lid I had no tune either so I would think you go 12.3-12.6
Thread Starter
12 Second Club
iTrader: (16)
Joined: Jul 2005
Posts: 783
Likes: 0
From: central coast, cali
right now im running a 13.6 @ 109mph. with street tires and 17inch rims and a lot of spinning. hopefully after the stall and drag radials, i can hit a 12.6 at least, but 12's for sure???
Originally Posted by 1fastz
right now im running a 13.6 @ 109mph. with street tires and 17inch rims and a lot of spinning. hopefully after the stall and drag radials, i can hit a 12.6 at least, but 12's for sure???
With that mph you should be running 12's already. Thrown some good tires on there DR's or ET streets for example, and you'll run 12.4-12.5 easy.
On street tires, it's gonna take some practice, but you should at least be able to get a high 12.
You may or may not gain a mph or 2, but you ET will go way down.
