evo2ls1

iTrader: (2)

just curious ran 8.3-8.5's with 2.1-2.4 60 ft. ten passes turned 89.2-89.8mph what should the car run and what should i trap in the 1/4. 99/m6, thanks

Jersey_TA

iTrader: (1)

I'd say 12.3-12.6. You need to get that 60 ft. down to a 1.8 or atleast a sub 2.xxx

evo2ls1

iTrader: (2)

tell me about that was on nitto DR's but on a unprepped track i will going to MMP 1/4 track soon and see what it will run. in jan i am adding a ls6 intake with mass air my goal is 12.0's may have to change tires

aequitas

iTrader: (2)

What track do you go to?

Also, in January I might have a ls6 intake up for sale so pm me when you are looking for one

evo2ls1

iTrader: (2)

i run a local 1/8 mile track cottonwood one way drag-way, thanks for the heads up on the intake. will that intake work on my car, 99 FRC corvette m6, or are there other parts i should be looking to buy? iam also thinking of waiting a little longer and doing a cam with the intake. most people ive spoke say wait do heads with the cam but if i do a set of heads it will be afr's or trickflow's by the time i buy heads and other parts needed i will have another 3000$ invested too much money$$$ right now. can i do a cam with just push rods and valve springs or do i have to do a timing chain, oil pump ect....i feel with ls6 intake U/D pullies and cam i could run high elevens any advice? oh and what are you running in the 1/8 mile?