shakedown pass results
#1
Launching!
Thread Starter
iTrader: (13)
Join Date: Jul 2004
Location: fort worth texas
Posts: 269
Likes: 0
Received 0 Likes
on
0 Posts
shakedown pass results
car: 98 TA stock heads stock bottom end,
longtubes, tsp duals, ls6 intake, jantzer tb, lid, g5x2 cam, patriot springs, fully built 4l60e (vaccum modulated) pt4400, 3.73 gears, rear umi LCA's, and 26x10.5 16 MT et slick. and a tune from SQR
ran 9 times all consitent 7.6 or 7.77 at around 86-88 mph, is this ok if i were runnning th skinnies im sure that would have been at least another .1-.2 less
..all the runs were good execept it would still redline a bit at the end of the track on the 2-3 shift, seems like a tuning isssue with the shift point that need to be lowered....is this reasonable for my mods, i have a dry kit installed but the bottle was empty and with suck a big stall im not sure i can even use it
longtubes, tsp duals, ls6 intake, jantzer tb, lid, g5x2 cam, patriot springs, fully built 4l60e (vaccum modulated) pt4400, 3.73 gears, rear umi LCA's, and 26x10.5 16 MT et slick. and a tune from SQR
ran 9 times all consitent 7.6 or 7.77 at around 86-88 mph, is this ok if i were runnning th skinnies im sure that would have been at least another .1-.2 less
..all the runs were good execept it would still redline a bit at the end of the track on the 2-3 shift, seems like a tuning isssue with the shift point that need to be lowered....is this reasonable for my mods, i have a dry kit installed but the bottle was empty and with suck a big stall im not sure i can even use it