Help with chassis setup

Reply Subscribe

Thread Tools

Search this Thread

Nov 4, 2008 | 05:09 PM

98 4mula

Thread Starter

12 Second Club

iTrader: (7)

Joined: Feb 2008

Posts: 192

Likes: 0

From: Hayward, CA

Help with chassis setup

The motor is stock, 98 formula M6. Hotchkis LCA's and STB w/ Koni's all around. and a Moser 12 bolt w/ 4.10 gear 33 spline tru trac. What do you suggest to finish off my suspension. I still need a torque arm, rear bar (or drag bar), relocation brackets....

Nov 4, 2008 | 07:07 PM

Steve Burger

LS1TECH Sponsor

iTrader: (33)

Joined: Jul 2002

Posts: 4,399

Likes: 0

From: Out on the farm in Central IL

What do you want to accomplish? This is a very general question. Do you have an ET in mind? With a little more info we can assist in designing a setup for you.

Nov 4, 2008 | 07:36 PM

98 4mula

Thread Starter

12 Second Club

iTrader: (7)

Joined: Feb 2008

Posts: 192

Likes: 0

From: Hayward, CA

I want the car to hook fairly well and make sure im using every hp available. This is a DD so i don't need any race car only parts. I want to cut some really good 60 ft's around 1.6x.

Nov 5, 2008 | 08:06 AM

ndfrsd6

10 Second Club

iTrader: (5)

Joined: Sep 2005

Posts: 2,141

Likes: 1

From: Homer Glen IL

drag radials

Nov 5, 2008 | 11:31 AM

UMI Performance

FormerVendor

iTrader: (77)

Joined: Apr 2004

Posts: 5,473

Likes: 7

From: Philipsburg, Pa

Hello,

We make a few different options on a torque arm depending on your set-up and exhaust. Our full list of torque arms can be seen here- http://www.umiperformance.com/produc...ategory_id=130

We also offer relocation brackets for the Moser rear end which can be seen here- www.umiperformance.com/2011

If you need any help choosing the correct items please ask and I am glad to help.

Thank you!
Ryan

Nov 5, 2008 | 11:33 AM

98 4mula

Thread Starter

12 Second Club

iTrader: (7)

Joined: Feb 2008

Posts: 192

Likes: 0

From: Hayward, CA

So just drag radials? What about a torque arm, relocation brackets or even SFC's?

Nov 5, 2008 | 11:36 AM

UMI Performance

FormerVendor

iTrader: (77)

Joined: Apr 2004

Posts: 5,473

Likes: 7

From: Philipsburg, Pa

Quote:

Originally Posted by 98 4mula

So just drag radials? What about a torque arm, relocation brackets or even SFC's?

I always recommend relocation brackets, they are a very inexpensive traction device and do wonders for low t0 mid HP cars. For the torque arm what headers and y-pipe are you currently using?