Drag Racing Tech
Sponsored by:
Sponsored by:

Heads Cam guys/ Cam only guys, what are your 1/8th times?

Thread Tools
 
Search this Thread
 
Old 10-01-2003 | 02:11 AM
  #1  
Scoobie's Avatar
Thread Starter
TECH Fanatic
iTrader: (8)
 
Joined: Aug 2003
Posts: 1,145
Likes: 0
From: Germany
Default Heads Cam guys/ Cam only guys, what are your 1/8th times?

With Mods in sig i went a best last week of 8.011 @ 90.23 Mph in the 1/8th. I have yet to get a tune, have a stock ls1 intake and throttle body and made the passes on bald nittos. I made 6 passes total all night. 5 were in the 8.0's, one 8.1. I had a best 60 of 1.92 and a worst of 2.01. A few guys said my car was on crack fore being a 6 speed car. A few automatic cam only cars are cutting 1.7 60's on nittos and running 8.0's 8.1's. Is my car right on? strong? weak? I saw one LS1 with Absolute stage 2's and im not sure what cam go 7.72 at 93 mph. Thanks
Scoobs
Old 10-01-2003 | 05:24 AM
  #2  
EVIL's Avatar
11 Second Club
 
Joined: Nov 2001
Posts: 1,645
Likes: 0
From: Hanover MD
Default Re: Heads Cam guys/ Cam only guys, what are your 1/8th times?

7.60's @ 93-94 mph with good traction.


Old 10-01-2003 | 10:15 AM
  #3  
JC's Avatar
JC
Launching!
 
Joined: Nov 2001
Posts: 229
Likes: 0
From: Cedar Hill, Tx
Default Re: Heads Cam guys/ Cam only guys, what are your 1/8th times?

I have a 98 TA with the TR230 stock heads/YTP4200 and 4.10s

My best last week was a 7.29@92.9x
Old 10-01-2003 | 10:27 AM
  #4  
Bad Habit Bird's Avatar
TECH Fanatic

iTrader: (12)
 
Joined: Nov 2001
Posts: 1,934
Likes: 0
From: The Woodlands, TX
Default Re: Heads Cam guys/ Cam only guys, what are your 1/8th times?

I've gone 7.3x's with a 3600 raceweight and DA's over +2000
Old 10-01-2003 | 10:27 AM
  #5  
Mustang Hat'r 2's Avatar
TECH Enthusiast
20 Year Member
iTrader: (24)
 
Joined: Jun 2003
Posts: 644
Likes: 2
From: NEW YORK INTERNATIONAL RACEWAY PARK
Default Re: Heads Cam guys/ Cam only guys, what are your 1/8th times?

7.625 @ 91.85 With a 1.70 60 foot Im still missing some boltons, Intake, TB, and ASP pully.
Old 10-01-2003 | 10:34 AM
  #6  
CHRISPY's Avatar
TECH Senior Member
 
Joined: Nov 2001
Posts: 10,341
Likes: 0
Default Re: Heads Cam guys/ Cam only guys, what are your 1/8th times?

7.1@98.8mph

I have a few extra cubes (360ci) but stage 1 heads with extra port work.

Old 10-01-2003 | 12:55 PM
  #7  
Roger White's Avatar
Launching!
 
Joined: Dec 2001
Posts: 231
Likes: 0
From: Collin County
Default Re: Heads Cam guys/ Cam only guys, what are your 1/8th times?

CAM_ONLY MMT M2
7.30 @ 92

Old 10-01-2003 | 01:39 PM
  #8  
Scoobie's Avatar
Thread Starter
TECH Fanatic
iTrader: (8)
 
Joined: Aug 2003
Posts: 1,145
Likes: 0
From: Germany
Default Re: Heads Cam guys/ Cam only guys, what are your 1/8th times?

Wow, you A4 guys are tearing it up. Any more M6 guys. Most of you i see are heads as well. Ill be happy running 7.70's on just a cam once i get my intake, tune and tb. I think its possible.
Old 10-01-2003 | 01:43 PM
  #9  
Pro Stock John's Avatar
LS1Tech Co-Founder
20 Year Member
iTrader: (34)
 
Joined: Nov 2001
Posts: 44,826
Likes: 1,249
From: Chicago, IL
Default Re: Heads Cam guys/ Cam only guys, what are your 1/8th times?

92-93mph in the 1/8th, you should do the LS6 intake it's worth a solid tenth for you.
Old 10-01-2003 | 02:15 PM
  #10  
n2o's Avatar
n2o
TECH Enthusiast
iTrader: (1)
 
Joined: Jan 2003
Posts: 702
Likes: 0
From: Saban Country
Default Re: Heads Cam guys/ Cam only guys, what are your 1/8th times?

7.9's with a 1.9 60' and can't powershift 1-2 because the track is so bad. On Bfg's, 224 pp5.3's. I am going for a set of e.t. streets and nxl kit next. But yes a 7.7x is possible with good traction. You need some et's as well. Good luck.
Old 10-01-2003 | 02:57 PM
  #11  
EVIL's Avatar
11 Second Club
 
Joined: Nov 2001
Posts: 1,645
Likes: 0
From: Hanover MD
Default Re: Heads Cam guys/ Cam only guys, what are your 1/8th times?

looks like i need to work on my 60 more, some of you guys are getting way better 1/8th mile times than me with the same mph.


Old 10-01-2003 | 07:28 PM
  #12  
Hawkn01's Avatar
10 Second Club
iTrader: (1)
 
Joined: Aug 2002
Posts: 1,338
Likes: 1
From: Hampton Roads,Va.
Default Re: Heads Cam guys/ Cam only guys, what are your 1/8th times?

7.320 @ 91.79 with a stock internal bolt-on car and a Yank PT-4400, race weight was 3370
Old 10-01-2003 | 07:49 PM
  #13  
bspz28's Avatar
TECH Fanatic
iTrader: (1)
 
Joined: Nov 2001
Posts: 1,543
Likes: 0
From: Long Island
Default Re: Heads Cam guys/ Cam only guys, what are your 1/8th times?

7.08 @ 97.59 that was on a 11.09 pass at 124 mph
Old 10-01-2003 | 08:01 PM
  #14  
JS's Avatar
JS
10 Second Club
iTrader: (4)
 
Joined: Nov 2001
Posts: 7,303
Likes: 4
From: Delray Beach, Fl.
Default Re: Heads Cam guys/ Cam only guys, what are your 1/8th times?

3550lbs A4 and have run 7.00's@97MPH

Old 10-01-2003 | 10:55 PM
  #15  
XFiveLiter's Avatar
TECH Resident
 
Joined: Feb 2002
Posts: 992
Likes: 0
From: Schererville, IN
Default Re: Heads Cam guys/ Cam only guys, what are your 1/8th times?

7.230 @ 93.35 (1.52) cam only
Old 10-01-2003 | 11:20 PM
  #16  
CamaroCain's Avatar
TECH Veteran
iTrader: (1)
 
Joined: Nov 2001
Posts: 4,167
Likes: 0
From: Houston,TX
Default Re: Heads Cam guys/ Cam only guys, what are your 1/8th times?

7.320 @ 91.79 with a stock internal bolt-on car and a Yank PT-4400, race weight was 3370
Do you know what the DA was on that run?
Old 10-01-2003 | 11:38 PM
  #17  
DMcRacer's Avatar
10 Second Club
iTrader: (2)
 
Joined: Nov 2001
Posts: 711
Likes: 0
From: Navarre, Fl.
Default Re: Heads Cam guys/ Cam only guys, what are your 1/8th times?

I just ran 7.46@91.1 stock internal bolt on car. 3460lbs. DA was 1066.
Old 10-02-2003 | 12:41 AM
  #18  
RAMnGO's Avatar
Launching!
 
Joined: Mar 2003
Posts: 213
Likes: 0
From: Central Va
Default Re: Heads Cam guys/ Cam only guys, what are your 1/8th times?

ok i feel sick again.. my 02 ws6 m6 ran a best of 8.66 and that was with the h/c swap..stock engine ran a best 1/8 of 8.75 geeze but i know its coz of traction.. my usual 60' times are 2.2- 2.5 also too as i wind first up it starts to wheelhop bad.. also no tuning either.. i know the car has more potential and its even mroe frustrating to know this and i don't have the money now to complete it yet.. well hopefully over the winter i will be able to..
Old 10-02-2003 | 02:32 AM
  #19  
Hawkn01's Avatar
10 Second Club
iTrader: (1)
 
Joined: Aug 2002
Posts: 1,338
Likes: 1
From: Hampton Roads,Va.
Default Re: Heads Cam guys/ Cam only guys, what are your 1/8th times?

7.320 @ 91.79 with a stock internal bolt-on car and a Yank PT-4400, race weight was 3370
Do you know what the DA was on that run?
Linda,going off local wether station readings it came out to 1085' below. Don't really beleive that though. Track was MIR in Md. Also that was with the Yank converter, I have the TCS in there now and it doesn't 60' as well.
Old 10-02-2003 | 07:46 AM
  #20  
98TAauto's Avatar
TECH Veteran
iTrader: (2)
 
Joined: Nov 2001
Posts: 4,316
Likes: 0
From: Warsaw, Va
Default Re: Heads Cam guys/ Cam only guys, what are your 1/8th times?

cam only with 3.23's
7.30 @ 93.4 mph on a 1.56 60ft at 3450-3500 raceweight

nopeing for some 7.0 H/C times soon



All times are GMT -5. The time now is 05:39 PM.