10pt Wolfe RollCage Install w/pics
01-11-2009, 09:19 PM
#21
Banned
iTrader: (4)
Join Date: Dec 2007
Location: Iowa
Posts: 324
Likes: 0
Received 0 Likes
on
0 Posts
The rear view mirrior is still intact in the exact location and is fully functional, As for the seats, If you do not alter the floor boards you can use the stock seat bolt location as long as the back or upright of the seat is bolted (secured) to the cage which it is.
01-12-2009, 09:37 AM
#22
12 Second Club
Thread Starter
iTrader: (9)
Join Date: Jun 2006
Location: Grand Forks, North Dakota
Posts: 1,051
Likes: 0
Received 0 Likes
on
0 Posts
The rear view mirrior is still intact in the exact location and is fully functional, As for the seats, If you do not alter the floor boards you can use the stock seat bolt location as long as the back or upright of the seat is bolted (secured) to the cage which it is.
01-12-2009, 11:04 PM
#23
12 Second Club
Thread Starter
iTrader: (9)
Join Date: Jun 2006
Location: Grand Forks, North Dakota
Posts: 1,051
Likes: 0
Received 0 Likes
on
0 Posts
Update*
Modified Glove Compartment for Body Control Module (BCM):
Rollcage went through BCM mount:
Just threw it in the glove box, ill secure it more later...
Glove Compartment in:
Speedo In:
Top Dash Cover Modified for cage:
Top Dash Cover Installed:
Modified Top Dash (Little too big...but good enough):
It wasnt easy to fit up there so i didnt want to do it twice...
Driver Side Dash:
Need to cut vinyl and pull it up some:
Modified Glove Compartment for Body Control Module (BCM):
Rollcage went through BCM mount:
Just threw it in the glove box, ill secure it more later...
Glove Compartment in:
Speedo In:
Top Dash Cover Modified for cage:
Top Dash Cover Installed:
Modified Top Dash (Little too big...but good enough):
It wasnt easy to fit up there so i didnt want to do it twice...
Driver Side Dash:
Need to cut vinyl and pull it up some:
02-21-2009, 01:43 PM
#30
No difference
__________________
95 Pontiac Formula- Stock engine with ATI Procharger, Moser 12 bolt w/4:30 gears, Rossler trans, Neil Chance 4000 stall, M/T ET streets, 10.914@ 121.90mph, 1.452 60ft. GMHTP November 2010 Feature Car. Check it out at:
https://www.motortrend.com/features/...ebird-formula/
http://www.youtube.com/watch?v=abZ1z...ature=youtu.be
95 Pontiac Formula- Stock engine with ATI Procharger, Moser 12 bolt w/4:30 gears, Rossler trans, Neil Chance 4000 stall, M/T ET streets, 10.914@ 121.90mph, 1.452 60ft. GMHTP November 2010 Feature Car. Check it out at:
https://www.motortrend.com/features/...ebird-formula/
http://www.youtube.com/watch?v=abZ1z...ature=youtu.be
02-22-2009, 12:23 PM
#32
That is correct with the permanent attachment at the bottom.
__________________
95 Pontiac Formula- Stock engine with ATI Procharger, Moser 12 bolt w/4:30 gears, Rossler trans, Neil Chance 4000 stall, M/T ET streets, 10.914@ 121.90mph, 1.452 60ft. GMHTP November 2010 Feature Car. Check it out at:
https://www.motortrend.com/features/...ebird-formula/
http://www.youtube.com/watch?v=abZ1z...ature=youtu.be
95 Pontiac Formula- Stock engine with ATI Procharger, Moser 12 bolt w/4:30 gears, Rossler trans, Neil Chance 4000 stall, M/T ET streets, 10.914@ 121.90mph, 1.452 60ft. GMHTP November 2010 Feature Car. Check it out at:
https://www.motortrend.com/features/...ebird-formula/
http://www.youtube.com/watch?v=abZ1z...ature=youtu.be
