6.44@104.3 with a 1.43 60ft.
10-04-2003 | 11:59 PM
#1
Thread Starter
9 Second Club
Joined: Jul 2003
Posts: 1,195
Likes: 0
6.44@104.3 with a 1.43 60ft. Well guys, I am getting closer and closer to the goal of a 6.39 or a 9.99. These are my mods.
2002 Camaro SS 35th Aniversery Special Edition
Stock bottom end 346.
GTP S2 heads
RPM S2 cam
pulley
lid
TB
Grot LTs
True 2.5in duals with an X
NX maf kit pilled for 150
MSD wires
TR6's
Built 4L60E (John Goebal)
Nitrous 3500 stall (John Goebal)
Moser 12 bolt (3.73 gears)
Hals (5 in the rear 6 up front)
BMR Subframs
lower control arm
panhard rod
Shohn torque arm with DS loop
The car was hauling ***. I was just wondering who all else is in this time bracket with Stock bottom end LS1 and a 4L60E.
2002 Camaro SS 35th Aniversery Special Edition
Stock bottom end 346.
GTP S2 heads
RPM S2 cam
pulley
lid
TB
Grot LTs
True 2.5in duals with an X
NX maf kit pilled for 150
MSD wires
TR6's
Built 4L60E (John Goebal)
Nitrous 3500 stall (John Goebal)
Moser 12 bolt (3.73 gears)
Hals (5 in the rear 6 up front)
BMR Subframs
lower control arm
panhard rod
Shohn torque arm with DS loop
The car was hauling ***. I was just wondering who all else is in this time bracket with Stock bottom end LS1 and a 4L60E.
10-05-2003 | 09:39 AM
#3
Re: 6.44@104.3 with a 1.43 60ft.
10-05-2003 | 10:55 AM
#4
TECH Enthusiast
Joined: Jan 2002
Posts: 585
Likes: 0
From: las vegas, nev
Re: 6.44@104.3 with a 1.43 60ft. im right there with you. i went 6.55 @ 105 with a 1.46 60'(10.27 @ 132 in the 1/4) with stock bottom end. i dont have a 4l60e, but i do still have the stock torque arm
